Split System Installation Belgrave Heights

Split System Install in Belgrave Heights

There’s nothing more satisfying than coming to your home on a hot 40 degree day switching on your split system air conditioning, and in a matter of minutes the house and family members are cool.

Split system air conditioning offers this the ability to be used in a variety of ways, making them difficult to beat. But like all heaters and coolers, to ensure they are operating optimally they must be maintained and maintained in a professional manner by skilled professionals. Gas Heating Service Melbourne offers experienced technicians who are familiar with split system air-conditioners both inside and outside. They specialise in all makes and models and give you confidence that we will finish the job to professional standards.

We offer a wide range of services that include the following:

• Split System Installation Belgrave Heights
• Split System Repairs
• Split System Servicing

Our team of experts in heating and cooling are fully qualified and licensed to perform all kinds of tasks. If you’re searching for Split System Installation Belgrave Heights services then contact Local Heating and Cooling Professionals Belgrave Heights today and talk with one of our helpful team members.

How Do Split Systems Function?

Air conditioning splits have their name because of half that system (condenser) is located outside of the house while the other part (fan coil) is installed inside. While cooling, warm air from inside the room is taken in by the fan coil and taken out, resulting into cool air flowing back into the home. Reverse cycle allows the heat pump to run in reverse in order to provide warmth in cold weather.

Systems for split air conditioners can be placed in rooms, areas or even multiple rooms that are connected via copper pipes into an outdoor unit (condenser). Systems with multi-head splits can be used for more than nine rooms using only one outdoor unit, permitting individual temperature control of each room.

What Are The Running Costs For Split Systems?

One of the most recommended brands to use for Split Systems is Mitsubishi Electric. For the Mitsubishi Electric GE Series 2.5KW Split System, installed in the smallest of rooms, providing regular cooling and heating throughout the summer and winter time, the annual running cost is $272.34.

Reduced Split System Running Costs

It’s not difficult to cut down on your operating costs by using the Split System. Depending on the model that you purchase, and the star rating will determine how you’ll save each year. However looking beyond the initial cost to the way you make use of it Split System can help as well.

Guide to Using A Split System

• Set the thermostat between 24C and 26C for cooling. Any degree lower than that will increase your running costs by 10%..
• Use the economy setting in the event that your split system is equipped with one. You should also regularly maintain your air conditioning.
• Make sure that the sun’s heat is kept out by closing the curtains and exterior blinds during the daytime. Close doors and windows to areas that are being cooled while the split system is operating.
• When the split system has been turned off and the cooler is outside, open doors as well as windows in order to let cool air inside.
• Insulate your house to block the warm summer days out and cool inside during winter.
• Dress according to the weather conditions.

Why Select Split Systems?

Air conditioning units mounted in wall are the most widely used air conditioning systems for homes since they are inexpensive and easy to maintain.

Inverter Technology

Inverter technology is the mainstay for comfort all through the year since it keeps the temperature at a constant level, reduces costs (less energy consumption) and generates less noise when it is used. This is achieved by managing the speed of the compressor more precisely.

Affordable

Wall mounted Split AC units are your most economical option for a single room apartment, small home or even a studio as they are relatively cheap to purchase (depending on how many indoor units you’ll need) and don’t need requirement for ductwork.

Independent Temperature Control

Each indoor unit is able to control the room that it is situated in, which means that each room is able to have various temperature.

Air Quality

A lot of Split air conditioners have air filtering functions and humidity control that regulate the amount of dust and humidity in the room. This provides those with sensitive skin (children older, asthmatic, or allergic people) an ease of body and mind.

Multi-Head Split Systems

Multi-Head Split Systems allow different indoor units to be connected to one outdoor condenser which in turn gives you the peace of mind that you have the best cooling system (in terms of output and physical constraints) for the room you are in.

Split System FAQ

Is a split system the same thing as the air conditioning?

Sure, Split System can be described as an air conditioner system. However, there are different types of air conditioning system that include

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Ducted refrigerated Air Conditioner

Each system operates with refrigerant and electricity under the same principal but very different in terms of how they are installed.

How long does it take to install a split-system air conditioner?

Generally speaking for a single AC split installation can be completed in 3-6 hours. However, the exact amount of time can vary based on many factors such as below;

• Size and location of both outdoor and indoor unit
• The route of copper pipes between indoor and outdoor unit
• Electrical connections from the main switchboard up to the AC unit

More Split System FAQ's

Do I need to replace or fix my cooling system?

In the majority of cases the air conditioner is over > 10-years-old and there are apparent issues with your air conditioner there’s a great possibility that it will be cheaper to replace then repair.

To assist you in making the best decision To make the right choice, speak with the team at ComfyHome to get an honest and accurate assessment of the condition of your air conditioner.

What size of split system air conditioning will I require?

A common measurements ratio is multiply the area of the room by a factor of 0.15 in order to determine the power of the measurement unit in kilowatts.

If you have a room size of 40 square metres, you’ll require a split system air conditioning unit with 6 kW. A unit with a cooling capacity of 2.5kW is ideal for 10-20 sqm rooms areas.

However, the size of the Split system air conditioning required will also be affected by other variables such as how well the insulation is in place, the amount of people residing there and’ position.

To make an accurate determination of the Split Unit size we recommend you contact us for a comprehensive analysis.

More Split System FAQ's

How long will an air conditioner split system last?

In general an air conditioner is built to last 10-20 years in the average. However, this is contingent upon a myriad of things like the manufacturer of the air conditioner as well as the quality of the installation, the routine maintenance history and so on…

It is essential to service the Split System air conditioner on a regular basis to extend its life and increase efficiency.

How often should I wash my air conditioner’s air filter?

As per Daikin Australia, it is strongly suggested that you should take care to clean your air conditioning filter every 2 weeks to increase the efficiency of the system and reduce your energy consumption by 5%-15%.

Belgrave Heights Gas Heating Services

• Braemar Ducted Gas Heating Servicing & Repair Belgrave Heights
• Evaporative Cooling Repair Belgrave Heights
• Brivis Ducted Gas Heating Servicing & Repair Belgrave Heights
• Vulcan Ducted Gas Heating Servicing & Repair Belgrave Heights
• Ducted Gas Heating Servicing & Repair Belgrave Heights
• Gas Heating Belgrave Heights
• Gas Heating Installation Belgrave Heights
• Gas Space Heater Repair Belgrave Heights
• Carbon Monoxide Testing Belgrave Heights
• Gas Heating Service Belgrave Heights
• Gas Hot Water System Installation & Repairs Belgrave Heights
• Belgrave Heights
• Gas Log Fire Service & Repairs Belgrave Heights
• Gas Heating Repairs Belgrave Heights
• Gas Appliance Servicing & Repair Belgrave Heights

What Types of Systems We Service & Repair

Every brand and type of heating comes with its own operation and maintenance; our experienced technicians are knowledgeable and expertise to provide first rate services on all types of heating equipment, which includes:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team has years of experience with heating repair and maintenance that specialize in all kinds and models of heating systems. We are proud of our quick response time and commitment to quality, efficiency and reliability.

We are able to maintain and service the top brands of heating units and systems which include:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• No Hidden Fees, Price Up Front
• Low Prices You Can Trust
• High-Quality Workmanship Guaranteed
• Great Reputation & Reviews
• We’re friendly and personable.
• Professionally trained and licensed team
• Get a Free Quote and No Costs

Our Promise To You

At Gas Heating Service Melbourne we understand the discomfort of not having hot water, and it’s something that we would never want anyone to be forced to endure. That’s why we give the highest priority for hot water emergencies. Our plumbers are reliable and friendly and without doubt, we will be able to assist with any emergency.

We pride ourselves on our customer service , and it is our belief that even the small things count the most.

We pride ourselves on our exceptional customer service. here’s why our customers appreciate us:

• We always show up when say we will.
• Our staff will give you their number when they’re 30 minutes away.
• Price upfront, competitive and professional advice prior to the start of the project.
• Always getting our hands clean after us.

Our company Gas Heating Service Melbourne offer emergency and maintenance services for plumbing, heating, and electrical. If at any time you have questions about our services and the products we offer.