Split System Installation Briar Hill

Split System Installation in Briar Hill

There’s nothing better than arriving home from a scorching 40 degree day flipping on your split-system air conditioning, and in a matter of seconds, the house and your family will be cool.

Split system air conditioning offers this flexibility, which makes them difficult to beat. But like all heaters and coolers that are required to run at their peak they must be maintained and serviced to a high standard by experienced professionals. Gas Heating Service Melbourne offers experienced technicians who know split system air-conditioners in and out. They are experts in all makes and models of these units providing you with assurance that they will complete the task to professional standards.

We provide a range of services that comprise the following:

• Split System Installation Briar Hill
• Split System Repairs
• Split System Servicing

Our team comprised of HVAC and Cooling experts are licensed and fully trained to perform all kinds of work. If you’re searching for [keywords lower] Briar Hill services then contact Local Heating and Cooling Professionals Briar Hill today and talk to one of our knowledgeable team members.

How Do Split Systems Work?

Air conditioning splits earn their name because of half the system (condenser) is located outside of the home, while the other portion (fan coil) is inside. When it cools, warm air inside the room is brought in by the fan coil before being is then removed, which results in cool air being recirculated back into the house. While reverse cycle allows for the heat pump to run in reverse in order to provide warmth in cold weather.

Systems for split air conditioners can be installed to specific rooms, areas or even multiple rooms connected by copper piping into an outdoor unit (condenser). Split air conditioners with multiple heads are able to be fitted for at least nine rooms using only one outdoor unit and allow for separate temperature control for each room.

What Are The Running Costs With Split Systems?

One of our recommended brands that we recommend for Split Systems is Mitsubishi Electric. If you are looking for the Mitsubishi Electric GE Series 2.5KW Split System, installed in an area that is small, and provides regular cooling and heating during the summer and winter seasons, the annual running cost would be $272.34.

The reduction of the Split System Operating Costs

It doesn’t take much to save on running expenses by using the Split System. Based on the model you purchaseand its star rating, you will be able to determine how much you will save each year. But looking beyond the initial price to how you utilize the Split System can help as well.

Tips For Using Split Systems

• Set the thermostat to 24C and 26C to allow for cooling. Every degree lower during summer will increase your running costs by 10%..
• Choose the economy option if your split system has one. Ensure that you regularly service your air conditioner.
• Keep the sun’s heat away by closing curtains and blinds during the daytime. Close doors and windows to areas that are being cooled while the split system is operating.
• If the split system is turned off and the cooler is outside, open the doors as well as windows in order to let the cool air flow in.
• Insulate your property to help keep the cool summer air out and keep the heat in during winter.
• Dress appropriately for the weather.

Why Select A Split System?

Wall mounted split air conditioning systems are the most frequently used residential air conditioning system because they’re affordable and easily to maintain.

Inverter Technology

Inverter technology is your key to more comfort throughout the year since it keeps a constant temperature, saves costs (less consumption of energy) and generates less noise when it is used. This is accomplished by managing the speed of the compressor more precisely.

Affordable

Wall-mounted Split AC system are most cost-effective option for a single room or apartment since they are inexpensive to purchase (depending on the amount of indoor units you will require) and they don’t require necessary duct work.

Independent Temperature Control

Each indoor unit is able to control the area it is located in, so each room is able to have distinct temperature.

Air Quality

Many AC splits have air filtering functions and humidity control which control the amount dust and humidity within the room. This can provide those with sensitive conditions (children, elderly, asthmatic or allergic consumers) an unwinding body and mind.

Multi-Head Split Systems

Multi-Head Split Systems allow multiple indoor units to be connected to a single outdoor condenser which gives you the convenience of having the perfect Air conditioner (in terms of physical and output constraints) for a particular room.

Split System FAQ

Is a split system the same as an air conditioner?

Absolutely, Split System is an air conditioning system. However, there are many kinds of air conditioning systems. These which include:

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Ducted refrigerated air conditioner

All these systems operate using refrigerant and electricity, based on the same principle, but are different in term of installation.

How long does it take to install a split system air conditioner?

Generally speaking an individual split air conditioning system installation should take 3-6 hours. But, the exact amount of time could vary based on many factors such as below:

• Size and location of both indoor and outdoor unit
• The copper pipes are routed between the outdoor unit and the indoor unit
• Electrical connections from main switchboard up to the AC unit.

More Split System FAQ's

Should I replace or repair the air conditioning unit in my home?

In most situation the air conditioner is more than 10-years-old and there are noticeable issues with your A/C there’s a great possibility that it will be cheaper to replace then repair.

To assist you in making the right decision, it is best to talk to the experts at ComfyHome for an honest and accurate assessment of the condition of your air conditioner.

What size of split system air conditioner will I require?

A typical measuring ratio will multiple the size of the room by a factor of 0.15 to obtain the required power of the device in kilowatts.

If you have a room size that is 40 sqm, you’ll have a Split system air conditioning unit with 6 kW. A unit with a cooling capacity of 2.5kW is suitable for 10 -20 sqm room areas.

However, the amount of the Split system air conditioning required can be dependent on other factors such as the room insulation, amount of people residing there and’ location.

For a precise assessment of the needed Split dimension, we suggest you get in touch with us to request a thorough analysis.

More Split System FAQ's

How long can an air conditioner split system last?

In general, an air conditioner is designed to last between 10 and 20 years in the average. But it depends on heaps of variables, including the brand of the A/C it is installed on, the quality of its installation, routine maintenance history etc…

It is important to service Your Split System AC often for a longer life span and to increase efficiency.

How often should I clean the air conditioner’s air filter?

According to Daikin Australia, it is strongly recommended that you cleanse your air conditioning filters every two weeks to improve the efficiency of the system, and ultimately reduce your energy consumption by 5 to 15 percent.

Briar Hill Gas Heating Services

• Evaporative Cooling Repair Briar Hill
• Briar Hill
• Carbon Monoxide Testing Briar Hill
• Gas Heating Service Briar Hill
• Ducted Gas Heating Servicing & Repair Briar Hill
• Gas Heating Installation Briar Hill
• Braemar Ducted Gas Heating Servicing & Repair Briar Hill
• Gas Heating Briar Hill
• Brivis Ducted Gas Heating Servicing & Repair Briar Hill
• Gas Log Fire Service & Repairs Briar Hill
• Gas Appliance Servicing & Repair Briar Hill
• Vulcan Ducted Gas Heating Servicing & Repair Briar Hill
• Gas Space Heater Repair Briar Hill
• Gas Hot Water System Installation & Repairs Briar Hill
• Gas Heating Repairs Briar Hill

What Types of Systems We Service & Repair

Every brand and type of heating has it’s specific operation and maintenance needs; our experienced technicians have the knowledge and expertise to provide excellent services on all types of heating equipment which includes:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team has many years experience in heating repairs and maintenance with a focus on all models and brands of heating systems. We are proud of our quick response time and commitment to excellence, efficiency and reliability.

We can service and maintain the leading brands of heating systems and units which include:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• Price Up-Front, No Hidden Fees
• Great Prices You Can Trust
• High-Quality Workmanship Guaranteed
• Great Reputation & Reviews
• We’re friendly, personable and polite.
• Professionally trained and licensed team
• Get a Free Quote and No Obligation

Our Promise To You

We at Gas Heating Service Melbourne we understand the frustration of not having hot water, and it’s something that we would never want anyone to need to go through. This is the reason we place the highest priority for hot water emergencies. All of our plumbers are courteous and reliable, without a doubt we are able to assist you in all situations.

We are proud of the quality of our customer service. It is our belief that even the tiny things are the most important.

We are proud of our exceptional customer service. and here’s the reason our customers are so happy with us:

• We will always be there when we tell you we will.
• Our staff will give you a call when they are 30 minutes away.
• Competitive pricing upfront and expert advice before we start the job.
• Always making sure we clean up after us.

At Gas Heating Service Melbourne offer emergency and maintenance services for plumbing, electrical and heating. If at any time you have any questions regarding our services and the products we offer.