Split System Installation Carlton

Split System Install in Carlton

There’s nothing better than arriving home on a hot 40 degree day turning on your split system air-conditioning and within a matter of seconds, the house and your family is cool.

Split system air conditioning offers this the ability to be used in a variety of ways, making them difficult to beat. However, like all heaters and coolers to keep them running optimally it is essential to have them serviced and maintained at a high level by experienced professionals. Gas Heating Service Melbourne offers experienced technicians who know split system air conditioners inside and out. They specialize in all brands and models offering you confidence that we can get the job done to professional standards.

We offer a wide range of services, which include the following:

• Split System Installation Carlton
• Split System Repairs
• Split System Servicing

Our team of professionals in the field of heating and cooling is licensed and qualified to handle all kinds of work. If you’re looking for split system installation Carlton services then contact Local Heating and Cooling Professionals Carlton today and talk to one of our knowledgeable team members.

How Do Split Systems Work?

Systems for split air conditioners have the name because of one half of it (condenser) is located outside of the home, while the other part (fan coil) is inside. While cooling, warm air in the room is brought in by the fan coil before being eliminated, resulting in cool air being recirculated back into the house. The reverse cycle permits the heat pump to operate in reverse to provide heating during colder days.

The split system of air conditioning can be fitted to individual rooms, areas or even multiple rooms joined by copper piping with an outside unit (condenser). Split air conditioners with multiple heads can be installed for more than nine rooms and only one outdoor unit permitting separate temperature control for each room.

What Are The Running Costs For Split Systems?

One of the top brands to use for Split Systems is Mitsubishi Electric. For the Mitsubishi Electric GE Series 2.5KW Split System, installed in a small room providing regular heating & cooling during the summer and winter months and the annual running costs will be $272.34.

Reduced Split System Operating Costs

It’s not difficult to reduce your running costs with the Split System. The model you purchaseand its star rating will determine how much you can save annually. However looking beyond the initial cost and how you make use of Your Split System can help as well.

Tips For Using Split Systems

• Set the thermostat to 24C and 26C to allow for cooling. Each degree less in summer will increase your running costs by about 10%..
• Choose the economy option when your split has one. Also, you should regularly check the condition of your air conditioning.
• Make sure that the sun’s heat is kept out by closing the curtains and exterior blinds during the day. Close doors and windows to areas that are cooled when your split systems are in operation.
• If the split system is switched off and its cooler outside, open the doors or windows and let the cool air in.
• Insulate your home to keep cool summer air out and keep the heat in during winter.
• Wear clothes that are appropriate for the weather.

Why Select Split Systems?

Split air conditioners mounted on walls are the most widely owned by homeowners who own a residential air conditioning system, as they are affordable and simple to maintain.

Inverter Technology

Inverter technology is your best option for greater comfort throughout the year because it maintains a constant temperature, saves costs (less energy use) and produces a lesser amount of noise when used. This is achieved by managing the speed of the compressor more precisely.

Affordable

Wall mounted divided AC models are best budget option for a small room or apartment since they are inexpensive to buy (depending on how many indoor units you need) and they don’t require duct work required.

Independent Temperature Control

Each indoor unit is able to control the area it is located in, thus each room may have distinct temperature.

Air Quality

Many HVAC systems that are split include air filtering functions and humidity control that regulate the amount of dust and humidity within a room. This gives sensitive customers (children and elderly, asthmatic or allergic people) the peace of body and mind.

Multi-Head Split Systems

Multi-Head Split Systems permit multiple indoor units to be connected to a single outdoor condenser which provides the convenience of having the perfect cooling system (in terms of output and physical constraints) for a specific room.

Split System FAQ

Are split systems the same as an air conditioner?

It is true that Split System has an air-conditioning system. There are various types of air conditioning system which include:

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Ducted refrigerated air conditioner

Each system operates on electricity & refrigerant under the same principle but they are different in term of installation.

What is the time frame to install a split-system air conditioner?

In general for a single AC split installation will take between 3-6 hours. But, the exact amount of time will depend on a variety of factors, such as below;

• Location and size of both indoor and outdoor unit
• The route of copper pipes between outdoor and indoor units
• Electrical connections from main switchboard to the A/C unit

More Split System FAQ's

Do I need to replace or fix my AC unit?

In the majority cases when your air conditioner is at least 10 years of age and you have evident issues with the A/C, there is a good possibility that it will be more affordable to replace than repair.

In order to help you make the right choice for your needs, consult with the staff at ComfyHome to give you an honest and accurate assessment of the condition of your air conditioner.

What size of split system air conditioning do I need?

The standard measure ratio would be to multiple the area of the room by a factor of 0.15 to obtain the required power of the device in kilowatts.

For a room area of 40 square metres, you’ll require a split air conditioning system of 6 kW. A unit with a cooling capacity of 2.5kW is perfect for 10-20 sqm rooms areas.

The size of the Split system’s air conditioning can be affected by other factors like the insulation of the room, the number of occupants and residents’ locations.

For an accurate assessment of the necessary Split Unit size we suggest that you contact us for a detailed analysis.

More Split System FAQ's

What is the longest an air conditioner split system last?

In general air conditioners are constructed to last for 10-20 years in the an average. However, it is contingent on a variety of variables, including the model of the AC as well as the quality of the installation, the routine maintenance history etc…

It is important to service the Split System air conditioner often to prolong lifetime and enhance effectiveness.

How often should I wash my air conditioner’s filter?

As per Daikin Australia, it is strongly recommended to clean your air conditioning filters every two weeks to improve the system’s efficiency and potentially reduce energy consumption by 5%-15 percent.

Carlton Gas Heating Services

• Carlton
• Gas Heating Installation Carlton
• Gas Heating Repairs Carlton
• Evaporative Cooling Repair Carlton
• Gas Space Heater Repair Carlton
• Carbon Monoxide Testing Carlton
• Gas Heating Carlton
• Vulcan Ducted Gas Heating Servicing & Repair Carlton
• Gas Appliance Servicing & Repair Carlton
• Gas Log Fire Service & Repairs Carlton
• Brivis Ducted Gas Heating Servicing & Repair Carlton
• Gas Heating Service Carlton
• Gas Hot Water System Installation & Repairs Carlton
• Ducted Gas Heating Servicing & Repair Carlton
• Braemar Ducted Gas Heating Servicing & Repair Carlton

What Types of Systems We Service & Repair

Each model and brand of heating system has its own maintenance and operation; our experienced technicians have the insight and expertise to provide first rate services for all heating systems which includes:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team is well-versed and has years of experience with heating repair and maintenance that specialize in all kinds and models of heating systems. We take pride in a rapid response time and dedication to efficiency, excellence and reliability.

We are able to maintain and service all top brands of heating units and systems such as:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• No Hidden Fees, Price Up Front
• Competitive Prices You Can Trust
• Quality Workmanship Guaranteed
• Excellent Reputation & Reviews
• We’re friendly and personable.
• A Team of Experienced and Licenced Professionals
• Request a Quote with No Costs

Our Promise To You

We at Gas Heating Service Melbourne we understand the inconvenience of not having any hot water. This is something we believe no one should have to experience. This is the reason we place such a high priority on hot water emergencies. Our experienced plumbers are friendly and trustworthy, without a doubt we will be able to assist with any emergency.

We take pride in the quality of our customer service. It is our belief that the tiny things are the most important.

We pride ourselves on our excellent customer service. this is why our customers appreciate us:

• We always show up when we tell you we will.
• Our experts will give you a call when they are 30 minutes away.
• Pricing upfront competitive and guidance prior to the start of the project.
• Always making sure we clean up after our own mess.

Our company Gas Heating Service Melbourne offer emergency and maintenance services in plumbing, heating, and electrical. If at any time you have any questions regarding our services or what we provide, we are here to help.