Split System Installation Clayton South

Split System Install in Clayton South

There’s nothing better than arriving home to a day and switching on your split system air-conditioning and within a matter of minutes your house and your family will be cool.

Split system air conditioning offers this versatility, which makes them tough to beat. But , just like all heaters or coolers to make sure they’re running at their best they should be maintained and serviced at a high level by qualified professionals. Gas Heating Service Melbourne offers experienced technicians who know your split system air conditioners inside and out. They specialize in all models and models and give you confidence that we will finish the job in a professional manner.

We provide a variety of services that comprise the following:

• Split System Installation Clayton South
• Split System Repairs
• Split System Servicing

Our team of experts in heating and cooling are licensed and fully trained to handle all kinds of work. If you’re searching for Split System Installation Clayton South services then contact Local Heating and Cooling Professionals Clayton South today and talk to one of our knowledgeable team members.

How Do Split Systems Function?

Split air conditioning systems have their name due to half this system (condenser) is located outside of the house , while the other part (fan coil) is inside. In cooling, warm air from inside the room is drawn in by the fan coil, and then eliminated, resulting in cool air recirculating back into the house. In reverse mode, it allows that the heating system to run in reverse, providing heating on cold winter days.

Systems for split air conditioners are installed to specific rooms, areas or even multiple rooms joined by copper piping into an outdoor unit (condenser). Split air conditioners with multiple heads are able to be fitted for more than nine rooms with just one outdoor unit and allowing for individual temperature control of each room.

What Are The Running Costs For Split Systems?

One of the most recommended brands of Split Systems is Mitsubishi Electric. If you are looking for an Mitsubishi Electric GE Series 2.5KW Split System, installed in the smallest of rooms, providing regular cooling and heating throughout the summer and winter time and the annual running costs would be measured at $272.34.

Lowering the Split System Running Costs

It’s easy to save on running expenses by using a Split System. Depending on the model that you purchaseand its star rating, you will be able to determine how much you’ll save per year. But looking beyond the initial cost and how you use it Split System can help as well.

Guide to Using Split Systems

• Set the thermostat between 24C and 26C to allow for cooling. Every degree lower during summer will increase your running costs by around 10%.
• Use the economy setting if your split system has one and regularly service your air cooling system.
• Make sure that the sun’s heat is kept out by closing curtains and external blinds in the morning. Close windows and doors to areas that are cooling when the split system is on.
• When the split system has been shut off and the cooler outside, you can open doors along with windows, allowing cool air in.
• Insulate your home to keep warm summer days out and cool inside during winter.
• Dress appropriately for the weather.

Why Select A Split System?

The wall mounted air conditioning system is the most frequently used air conditioning systems for homes because they are cost-effective and easy to maintain.

Inverter Technology

Inverter technology is your mainstay for comfort all through the year as it maintains the temperature at a constant level, reduces costs (less consumption of energy) and generates less sound when it is used. This is achieved through control of the compressor’s rotation speed more precisely.

Affordable

Wall mounted divided AC models are most cost-effective option for a single room, apartment or small house as they are comparatively inexpensive to buy (depending on the amount of indoor units you require) and do not require requirement for ductwork.

Independent Temperature Control

Each indoor unit has the ability to control the temperature of the room it is installed in, thus each room is able to have distinct temperature.

Air Quality

Many AC splits include air filtering and humidity control functions that control the amount of dust and humidity inside the space. This allows for sensitive customers (children and elderly, asthmatic or allergic people) the peace of body and mind.

Multi-Head Split Systems

Multi-Head Split Systems enable multiple indoor units to be connected to a single outdoor condenser which gives you the comfort of having the ideal air conditioner (in terms of output and physical constraints) for the room you are in.

Split System FAQ

Is a split system the same thing as an air conditioner?

It is true that Split System is an air conditioning system. However, there are different types of air conditioning system which include:

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Air conditioners that are duct-fed refrigerated

All these systems operate on electricity & refrigerant under the same principle but they are different in terms of how they are installed.

How long does it take to install a split-system air conditioner?

In general an individual split air conditioning system installation can last between 3 and 6 hours. But, the exact amount of time could vary based upon a number of variables, including below:

• Size and location of both outdoor and indoor unit
• Copper pipes that are routed between outdoor and indoor units
• Electrical connections from the main switchboards to A/C unit

More Split System FAQ's

Should I replace or repair my air conditioner?

In the majority of situations, if your air conditioner is more than 10 years and you have noticeable issues with your A/C, there is a good chance that it could be more affordable to replace than repair.

To assist you in making the best decision for your needs, speak with the team at ComfyHome to provide you with an honest evaluation of the condition of your air conditioner.

What size of split system air conditioning do I need?

A typical measurements ratio is multiple the room area by a ratio of 0.15 to get the needed power of the unit in Kilowatts.

For a room area of 40 square metres, you’ll have a Split system air conditioning unit with 6 kW. An air conditioning unit of 2.5kW is suitable for 10 -20 sqm room spaces.

The size of the Split system’s air conditioning requirements will also be affected by other variables such as the insulation in the room, the number of occupants and residents’ location.

For a precise assessment of the required Split dimension, we suggest you contact us for a comprehensive analysis.

More Split System FAQ's

How long can an air conditioner split system last?

In general the air conditioner is designed to last between 10 and 20 years on an average. But it depends on heaps of variables, including the manufacturer of the air conditioner and the quality of the installation, the routine maintenance history and more…

It is vital to check the maintenance of Your Split System AC on a regular basis for a longer life span and to increase efficiency.

Do I need to clean my air conditioner’s filter?

In accordance with Daikin Australia, it is highly recommended that you clean your air conditioning filters every 2 weeks to increase the system’s efficiency and potentially decrease your energy use by 5 to 15%.

Clayton South Gas Heating Services

• Gas Heating Repairs Clayton South
• Gas Heating Service Clayton South
• Carbon Monoxide Testing Clayton South
• Vulcan Ducted Gas Heating Servicing & Repair Clayton South
• Braemar Ducted Gas Heating Servicing & Repair Clayton South
• Ducted Gas Heating Servicing & Repair Clayton South
• Gas Appliance Servicing & Repair Clayton South
• Gas Heating Clayton South
• Gas Space Heater Repair Clayton South
• Gas Log Fire Service & Repairs Clayton South
• Clayton South
• Gas Hot Water System Installation & Repairs Clayton South
• Evaporative Cooling Repair Clayton South
• Gas Heating Installation Clayton South
• Brivis Ducted Gas Heating Servicing & Repair Clayton South

What Types of Systems We Service & Repair

Each type and brand of heating comes with its own operation and maintenance; our experienced technicians have the insight and expertise to provide top-quality services to all systems of heating for example:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team has years of experience in the field of heating repairs and maintenance, specialising in all styles and models of heating systems. We pride ourselves on having a rapid response time and dedication to efficiency, excellence and reliability.

We service and maintain the important brands of heating units and systems which include:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• No Hidden Fees, Price Up Front
• Competitive Prices You Can Trust
• Quality Workmanship Guaranteed
• Great Reputation & Reviews
• We’re personable and friendly
• Experienced & Licenced Team
• Get a Quote With No obligation

Our Promise To You

We at Gas Heating Service Melbourne we understand the frustration of not having hot water and it’s something that we would never want anyone to have to experience. This is the reason we place top priority for hot water emergencies. All of our plumbers are courteous and reliable, without a doubt we are able to assist you in any situation.

We are proud of our service to customers and it is our conviction that the tiny things are the most important.

We are proud of our outstanding customer service. here’s why our customers appreciate us:

• We always show up when declare that we will.
• Our techs will give you a an appointment when they are 30 minutes away.
• Pricing upfront competitive and guidance before we begin the work.
• Always getting our hands clean after ourselves.

At Gas Heating Service Melbourne offer emergency and maintenance services in plumbing, electrical and heating. If at any time you have some questions about our services or what we can offer, please contact us.