Split System Installation Ferntree Gully

Split System Installation in Ferntree Gully

There’s nothing better than arriving home on a hot day of 40 degrees and activating your split system air conditioning and in just a couple of minutes , your home and your family will be cool.

Split system air conditioning offers this flexibility, which makes them difficult to beat. But like all heaters and coolers to make sure they’re running optimally they must be checked and maintained at a high level by experienced professionals. Gas Heating Service Melbourne offers experienced technicians that know your split system air conditioners inside and out. They specialize in all brands and models of these units offering you assurance that they will finish the job to a professional standard.

We offer a variety of different Split System Installation services which include the following:

• Split System Installation Ferntree Gully
• Split System Repairs
• Split System Servicing

Our team of professionals in the field of heating and cooling are fully qualified and licensed for all sorts of work. If you’re searching for split system installation in Ferntree Gully services then contact Local Heating and Cooling Professionals Ferntree Gully today and talk with one of our friendly team members.

How Do Split Systems Work?

The split systems of air conditioning get their name because half of this system (condenser) being located outside the house , while the other part (fan coil) is located inside. While cooling, warm air inside the room is absorbed via the fan coil before being removed, resulting in cool air flowing back into the house. Reverse cycle allows that the heating system to run in reverse to provide heating during cold days.

The split system of air conditioning are installed to specific rooms, areas , or rooms linked by copper pipe connecting to the outdoor unit (condenser). Multiple-headed split-air conditioning units can be used for at least nine rooms with only one outdoor unit permitting an individual temperature control for each room.

What Are The Ongoing Costs For Split Systems?

One of the top brands to use for Split Systems is Mitsubishi Electric. If you are looking for the Mitsubishi Electric GE Series 2.5KW Split System, installed in an unassuming room that provides regular cooling and heating during the summer and winter time The annual operating cost is $272.34.

Reducing the Split System Running Costs

It’s not difficult to reduce your running costs with a Split System. Depending on the model you purchaseand its star rating will determine just how much you’ll save per year. But looking beyond the initial cost to the way you use your Split System can help as well.

Guide to Using A Split System

• Set the thermostat to 24C and 26, which is the ideal temperature for cooling. Any degree lower than that will increase your running costs by 10%..
• Use the economy setting If your split system comes with one. Ensure that you regularly service your air conditioner.
• Keep the sun’s heat away by closing curtains as well as external blinds during the day. Close all doors and windows in areas that are being cooled while the split system is on.
• When the split system is switched off , and the cooler outside, open doors or windows and let the cool air inside.
• Insulate your house to block warm summer days out and cool inside in winter.
• Dress appropriately for the weather.

Why Choose Split Systems?

Split air conditioners mounted on walls are the most frequently owned residential air conditioning system because they are cost-effective and easily to maintain.

Inverter Technology

Inverter technology is the most effective way to enjoy more comfort throughout the year because it maintains an even temperature, helps save costs (less energy use) and generates less sound when it is used. This is accomplished by controlling the compressor rotation speed more precisely.

Affordable

Wall-mounted divided AC units are your best cost-effective option for a single room, apartment or small house as they are comparatively inexpensive to buy (depending on how many indoor units you require) and do not require necessary duct work.

Independent Temperature Control

Each indoor unit is able to control the room that it is installed in, which means that each room can have a different temperatures.

Air Quality

A lot of split air conditioning systems feature air filtering and humidity control functions that control the amount of dust and humidity that can be found in the room. This gives sensitive customers (children and elderly, asthmatic or allergic users) an ease of body and mind.

Multi-Head Split Systems

Multi-Head Split Systems allow different indoor units to connect to one outdoor condenser, which gives you the peace of mind that you have the most suitable Air conditioner (in terms of output and physical restrictions) to a specific space.

Split System FAQ

Is a split system the same as one would expect from an air conditioner?

Absolutely, Split System can be described as an air conditioner system. However, there are different kinds of air conditioning systems. It includes;

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Ducted refrigerated Air Conditioner

All of them operate using refrigerant and electricity, based on the same principal but very different in terms of installation.

How long will it take to set up a split system air conditioner?

Generally speaking, a single split-system air conditioner installation will last between 3 and 6 hours. However, the exact amount of time can vary based upon a number of variables, including below:

• The size and location of both outdoor and indoor unit
• The copper pipes are routed between the outdoor unit and indoor unit
• Electrical connections from main switchboard to the A/C unit

More Split System FAQ's

Should I replace or repair my air conditioner?

In the majority of situations in the event that your A/C is more than 10 years of age and you notice obvious issues with your AC, there is a good possibility that it will be cheaper to replace rather than fix.

For help in making the best decision, it is best to contact the experts at ComfyHome for an honest opinion on the condition of your AC.

What size split system air conditioning do I need?

A typical measurements ratio is multiple the room area by a factor of 0.15 to calculate the necessary power of the device in kilowatts.

If you have a room size of 40 square meters, you will require a split system air conditioning unit with 6 kW. An air conditioning unit of 2.5kW is perfect for 10-20 square meter room spaces.

The size of the Split system’s air conditioning requirements will also be affected by other variables like the room insulation, amount of people residing there and’ position.

To make an accurate determination of the required Split unit size, please contact us for a detailed analysis.

More Split System FAQ's

How long will an air conditioner split system last?

In general, an air conditioner is built to last 10-20 years, on an average. But it depends on heaps of things like the brand of the A/C as well as the quality of the installation, the routine maintenance history etc…

It is essential to service the Split System air conditioner on a regular basis to prolong lifetime and enhance efficiency.

When should I clean my air conditioner’s filter?

According to Daikin Australia, it is strongly recommended that you clean your air conditioning filters every two weeks in order to boost the efficiency of the system and reduce your energy consumption by 5 to 15%.

Ferntree Gully Gas Heating Services

• Gas Heating Service Ferntree Gully
• Braemar Ducted Gas Heating Servicing & Repair Ferntree Gully
• Gas Appliance Servicing & Repair Ferntree Gully
• Gas Log Fire Service & Repairs Ferntree Gully
• Ducted Gas Heating Servicing & Repair Ferntree Gully
• Gas Heating Repairs Ferntree Gully
• Gas Space Heater Repair Ferntree Gully
• Brivis Ducted Gas Heating Servicing & Repair Ferntree Gully
• Ferntree Gully
• Evaporative Cooling Repair Ferntree Gully
• Gas Heating Installation Ferntree Gully
• Carbon Monoxide Testing Ferntree Gully
• Gas Heating Ferntree Gully
• Vulcan Ducted Gas Heating Servicing & Repair Ferntree Gully
• Gas Hot Water System Installation & Repairs Ferntree Gully

What Types of Systems We Service & Repair

Each brand and style of heating comes with its own maintenance and operation Our experienced technicians are knowledgeable and know how to provide top-quality services on all types of heating equipment, which includes:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team is well-versed and has years of experience with heating repair and maintenance and specialize in all types and brands of heating equipment. We are proud of our rapid response time and dedication to excellence, efficiency , and reliability.

We service and maintain the majority of major brands of heating units and systems which include:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• No Hidden Fees, Price Up Front
• Competitive Prices You Can Trust
• High-Quality Workmanship Guaranteed
• Excellent Reputation & Reviews
• We’re friendly, personable and polite.
• Professionally trained and licensed team
• Get a Quote With No Obligation

Our Promise To You

At Gas Heating Service Melbourne we understand the discomfort of not having hot water, and it’s something we don’t think anyone should have to experience. This is why we place top priority on hot water emergencies. Our experienced plumbers are friendly and trustworthy We will be able to assist you in any situation.

We are proud of our customer service , and it is our conviction that the minor things matter most.

We are proud of our outstanding customer service. Here’s why our clients are so happy with us:

• We always show up when say we will.
• Our techs will give you a an appointment when they are thirty minutes away.
• Competitive pricing upfront and expert advice prior to the start of the project.
• Always getting our hands clean after our own mess.

We at Gas Heating Service Melbourne offer emergency and maintenance services in plumbing, electrical and heating. If at any time you have questions about our services and the products we can offer, please contact us.