Split System Installation Mount Dandenong

Split System Install in Mount Dandenong

There’s nothing more enjoyable than coming home to a 40 degree day activating your split system air conditioning, and in a matter of seconds, the house and your family is cool.

Split system air-conditioning provides this versatility, which makes them tough to beat. Like all heaters and coolers that are required to run at their peak, they need to be maintained and maintained to a high standard by qualified professionals. Gas Heating Service Melbourne offers experienced technicians who know your split system air conditioners from top to bottom. They specialize in all brands and models of these units and give you assurance that they will finish the job at a professional level.

We provide a variety of services that comprise the following:

• Split System Installation Mount Dandenong
• Split System Repairs
• Split System Servicing

Our team of experts in heating and cooling are fully qualified and licensed to complete all types of work. If you’re in search of [keywords lower] Mount Dandenong services then contact Local Heating and Cooling Professionals Mount Dandenong today and talk to one of our knowledgeable team members.

How Do Split Systems Operate?

Split air conditioning systems have the name because of one half of it (condenser) located outside the house , while the other part (fan coil) is installed inside. When it cools, warm air from inside the room is drawn in from the fan coil before being removed, resulting in cool air being recirculated back into the house. In reverse mode, it allows heating pumps to run in reverse to provide heat on cold winter days.

Systems for split air conditioners are installed in individual rooms, zones or rooms that are connected via copper pipes into an outdoor unit (condenser). Multi-head split air conditioning systems can be set up in as many as nine rooms, with just one outdoor unit and allow for individual temperature control of each room.

What Are The Ongoing Costs With Split Systems?

One of the top brands of Split Systems is Mitsubishi Electric. For a Mitsubishi Electric GE Series 2.5KW Split System, installed in an area that is small, and provides regular cooling and heating throughout the summer and winter months and the annual running costs would be measured at $272.34.

The reduction of Costs of Split Systems Operating Costs

It doesn’t take much to cut down on your operating costs by using the Split System. Depending on the model you purchase, and it’s respective star rating, you will be able to determine how much you can save annually. However looking beyond the initial cost to the way you utilize your Split System can help as well.

Guide to Using A Split System

• Set the thermostat to 24C and 26C for cooling. Every degree lower during summer will raise the cost of running by around 10%.
• Use the economy setting when your split has one. You should also regularly maintain your air cooling system.
• Make sure that the sun’s heat is kept out by closing curtains and external blinds during the day. Close the doors and windows of areas that are being cooled while your split systems are operating.
• If the split system is switched off , and the cooler outside, it is recommended to open the doors as well as windows in order to let cool air in.
• Insulate your house to block heat out in summer and in the winter months.
• Dress appropriately for the weather conditions.

Why Select A Split System?

Split air conditioners mounted on walls are the most commonly used air conditioning systems for homes, as they are affordable and easily to maintain.

Inverter Technology

Inverter technology is the best option for greater comfort throughout the year as it maintains the temperature at a constant level, reduces costs (less energy use) and produces relatively less noise when it is used. This is accomplished by controlling the compressor rotation speed more precisely.

Affordable

Wall mounted wall mounted split AC system are most economical option for a single room apartment or small house because they are relatively inexpensive to purchase (depending on how many indoor units you need) and do not require necessary duct work.

Independent Temperature Control

Each indoor unit is able to regulate the space it is located in, so each room could have distinct temperature.

Air Quality

Many AC splits have air filtering functions and humidity control that regulate the amount of dust and humidity that can be found in the space. This can provide those with sensitive conditions (children and elderly, asthmatic or allergic consumers) an ease of mind and body.

Multi-Head Split Systems

Multi-Head Split Systems permit multiple indoor units to be connected to one outdoor condenser which in turn gives you the convenience of having the best AC (in terms of output and physical limitations) for a particular room.

Split System FAQ

Is a split system the same thing as one would expect from an air conditioner?

It is true that Split System is an air conditioning system. However, there are many kinds of air conditioning systems. These that include

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Ducted refrigerated air conditioner

All these systems operate using refrigerant and electricity, based on the same principle but they are different in terms of installation.

How long does it take to install a split system air conditioner?

In general for a single AC split installation will take between 3-6 hours. The exact length of time may vary based upon a number of variables, including below;

• Location and size of both outdoor and indoor unit
• The route of copper pipes between the outdoor unit and indoor unit
• Electrical connections from main switchboard up to the AC unit.

More Split System FAQ's

Should I replace or repair my air conditioner?

In the majority of cases when your A/C is more than 10-years-old and there are noticeable issues with your A/C There is a high chance that it could be more affordable to replace than repair.

In order to help you make the right decision To make the right choice, contact the experts at ComfyHome to get an honest evaluation of the state of your air conditioner.

What size split system air conditioning do I need?

A standard measure ratio would be to multiply the room area by a ratio of 0.15 to obtain the required power of the measurement unit in kilowatts.

For a room with a size of 40 square metres, you’ll require a split system air conditioning unit that is 6 kW. An air conditioning unit of 2.5kW is perfect for 10-20 square meter room areas.

However, the size of the Split system’s air conditioning can also be affected by other variables such as the insulation in the room, the amount of people residing there and’ location.

To make an accurate determination of the needed Split units size we suggest you contact us for a comprehensive analysis.

More Split System FAQ's

How long can an air conditioner split system last?

In general the air conditioner is built to last 10-20 years in the average. But it depends on heaps of things like the model of the AC, quality of the installation, routine service history and so on…

It is crucial to maintain your split system air conditioner on a regular basis for a longer life span and to increase efficiency.

What is the best frequency to wash my air conditioner’s air filter?

Based on Daikin Australia, it is strongly recommended to cleanse your air conditioning filters every 2 weeks to increase the efficiency of your system and possibly decrease your energy use by 5%-15%.

Mount Dandenong Gas Heating Services

• Gas Heating Service Mount Dandenong
• Evaporative Cooling Repair Mount Dandenong
• Ducted Gas Heating Servicing & Repair Mount Dandenong
• Gas Heating Repairs Mount Dandenong
• Gas Heating Mount Dandenong
• Gas Appliance Servicing & Repair Mount Dandenong
• Carbon Monoxide Testing Mount Dandenong
• Braemar Ducted Gas Heating Servicing & Repair Mount Dandenong
• Gas Hot Water System Installation & Repairs Mount Dandenong
• Vulcan Ducted Gas Heating Servicing & Repair Mount Dandenong
• Mount Dandenong
• Brivis Ducted Gas Heating Servicing & Repair Mount Dandenong
• Gas Log Fire Service & Repairs Mount Dandenong
• Gas Heating Installation Mount Dandenong
• Gas Space Heater Repair Mount Dandenong

What Types of Systems We Service & Repair

Each model and brand of heating system has its specific operation and maintenance needs Our highly skilled technicians have the knowledge and experience to offer the best service for all heating systems, which includes:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team has a wealth of experience in repairs and maintenance of heating systems that specialize in all kinds and models of heating systems. We are proud of our rapid response time as well as a commitment to efficiency, excellence and reliability.

We are able to service and maintain the majority of top brands of heating systems and units such as:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• No Hidden Fees, Price Up Front
• Great Prices You Can Trust
• Quality Workmanship Guaranteed
• Great Reputation & Reviews
• We’re Personable & Friendly
• A Team of Experienced and Licenced Professionals
• Get a Free Quote and No Costs

Our Promise To You

At Gas Heating Service Melbourne we understand the difficulty of not having hot water and it’s something we don’t think anyone should be forced to endure. This is why we place the highest priority for hot water emergencies. All of our experienced plumbers are reliable and friendly Without a doubt, we can assist you in any circumstance.

We take pride in our customer service and it is our conviction that the little things matter the most.

We pride ourselves on our outstanding customer service. Here’s why our clients love us:

• We always arrive when we say we will.
• Our experts will give you an appointment when they are 30 minutes away.
• Upfront competitive pricing and advice before we start the job.
• Always making sure we clean up after ourselves.

We at Gas Heating Service Melbourne offer emergency and maintenance services for plumbing, electrical, and heating. If at any time you have any questions regarding our services and the products we offer.