Split System Installation Mount Waverley

Split System Install in Mount Waverley

There’s nothing better than arriving home on a hot 40-degree day, switching on your split system air conditioning and in just a couple of seconds, the house and your family will be cool.

Split system air conditioning provides such versatility, which makes them tough to beat. Like all heaters and coolers, to ensure they are operating to their maximum they should be maintained and maintained in a professional manner by experienced professionals. Gas Heating Service Melbourne offers experienced technicians who are familiar with split system air-conditioners inside and out. They are experts in all makes and models offering you assurance that they will finish the job at a professional level.

We offer a variety of services that include the following:

• Split System Installation Mount Waverley
• Split System Repairs
• Split System Servicing

Our team comprised of HVAC and Cooling experts is licensed and qualified to perform all kinds of work. If you are looking for split system installation Mount Waverley services then contact Local Heating and Cooling Professionals Mount Waverley today and talk with one of our helpful team members.

How Do Split Systems Function?

Split air conditioning systems get their name because of half this system (condenser) located outside the house while the other half (fan coil) is installed inside. In cooling, warm air inside the room is brought in through the fan coil before being is then removed, which results in cool air being recirculated back into the home. The reverse cycle permits the heat pump to run in reverse to provide heat during colder days.

The split system of air conditioning are placed in rooms, areas , or rooms joined by copper piping connecting to the outdoor unit (condenser). Systems with multi-head splits are able to be fitted in at least nine rooms with just one outdoor unit as well as allowing individual temperature control of each room.

What Are The Ongoing Costs For Split Systems?

One of the most recommended brands that we recommend for Split Systems is Mitsubishi Electric. If you are looking for an Mitsubishi Electric GE Series 2.5KW Split System, installed in the smallest of rooms, providing regular cooling and heating throughout the summer and winter months, the annual running cost would be measured at $272.34.

Reduced Costs of Split Systems Running Costs

It’s not difficult to save on running expenses with the Split System. Based on the model you buy, as well as its star rating will determine how you’ll save each year. But looking beyond the initial cost to how you make use of the Split System can help as well.

Guide to Using A Split System

• Set the thermostat to 24C and 26, which is the ideal temperature for cooling. Every degree lower during summer increases the running cost by approximately 10%..
• Make use of the economy setting if your split system has one and regularly service your air conditioning.
• Keep the sun’s heat out by closing curtains and blinds during the daytime. Close all doors and windows in areas being cooled when your split systems are operating.
• If the split system is shut off and the cooler outside, it is recommended to open the doors as well as windows in order to let the cool air flow in.
• Insulate your home to keep the heat out in summer and inside during winter.
• Dress according to the weather conditions.

Why Choose Split Systems?

The wall mounted air conditioning system is among the most commonly owned residential air conditioning system because they’re affordable and easily to maintain.

Inverter Technology

Inverter technology is your key to more comfort throughout the year as it maintains a constant temperature, saves costs (less consumption of energy) and generates less sound when it is employed. This is achieved through control of the compressor’s rotation speed more precisely.

Affordable

Wall-mounted split AC system are most economical option for a single room, apartment or small house as they are relatively cheap to purchase (depending on the amount of indoor units you need) and do not require necessary duct work.

Independent Temperature Control

Each indoor unit has the ability to control the temperature of the room it is installed in, which means that each room can have a distinct temperature.

Air Quality

Many AC splits come with air filtering and humidity control functions which regulate the amount of dust and humidity in a room. This provides those with sensitive skin (children or elderly, asthmatic or allergic customers) an ease of mind and body.

Multi-Head Split Systems

Multi-Head Split Systems allow different indoor units to be connected to one outdoor condenser, which in turn gives you the comfort of having the most suitable AC (in terms of output and physical limitations) for the room you are in.

Split System FAQ

Is a split system similar to an air conditioner?

Absolutely, Split System is an air conditioning system. However, there are many kinds of air conditioning systems. This includes;

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Ducted refrigerated Air Conditioner

Each of these systems operates on electricity & refrigerant under the same principles, however they are different in terms.

What is the time frame to set up a split system air conditioner?

In general, a single split-system air conditioner installation will be completed in 3-6 hours. But, the exact amount of time can vary based on various factors like below:

• Location and size of both outdoor and indoor unit
• Copper pipes that are routed between outdoor and indoor units
• Electrical connections from the main switchboard to the A/C unit.

More Split System FAQ's

Do I need to replace or fix my AC unit?

In the majority of cases the air conditioner is over > 10 years and you have apparent issues with your air conditioner, there is a good chance that it could be cheaper to replace rather than fix.

For help in making the right decision To make the right choice, talk to the experts at ComfyHome to provide you with an honest opinion on the condition of your air conditioner.

What size of split system air conditioning do I need?

A common measure ratio would be to multiple the area of the room by a ratio of 0.15 to calculate the necessary power of the unit in Kilowatts.

For a room area of 40 square meters, you will have a Split system air conditioning unit that is 6 kW. A cooling unit of 2.5kW is ideal for rooms with 10-20 square meters. areas.

The size of the Split system’s air conditioning requirements can also be affected by other factors like the room insulation, size of the room, and’ position.

To make an accurate determination of the necessary Split units size we suggest that you contact us for a comprehensive analysis.

More Split System FAQ's

How long can a split system air conditioner last?

In general an air conditioner is designed to last between 10 and 20 years, on average. But it depends on heaps of elements, such as the model of the AC it is installed on, the quality of its installation, the routine maintenance history and more…

It is important to service your split system air conditioner often for a longer life span and to increase effectiveness.

Do I need to clean the air conditioner’s air filter?

According to Daikin Australia, it is highly recommended that you cleanse your air conditioning filters every 2 weeks to increase the efficiency of the system and decrease your energy use by 5 to 15 percentage.

Mount Waverley Gas Heating Services

• Gas Heating Repairs Mount Waverley
• Gas Heating Mount Waverley
• Ducted Gas Heating Servicing & Repair Mount Waverley
• Mount Waverley
• Evaporative Cooling Repair Mount Waverley
• Gas Appliance Servicing & Repair Mount Waverley
• Vulcan Ducted Gas Heating Servicing & Repair Mount Waverley
• Gas Heating Service Mount Waverley
• Gas Space Heater Repair Mount Waverley
• Brivis Ducted Gas Heating Servicing & Repair Mount Waverley
• Gas Heating Installation Mount Waverley
• Gas Log Fire Service & Repairs Mount Waverley
• Carbon Monoxide Testing Mount Waverley
• Braemar Ducted Gas Heating Servicing & Repair Mount Waverley
• Gas Hot Water System Installation & Repairs Mount Waverley

What Types of Systems We Service & Repair

Each model and brand of heating requires its own maintenance and operation; our experienced technicians have the knowledge and experience to offer first rate services to all systems of heating, for example:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team is well-versed and has years of experience in heating repairs and maintenance that specialize in all kinds and types of heating systems. We take pride in a quick response time and commitment to quality, efficiency and reliability.

We can service and maintain the majority of major brands of heating systems and units, including:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• Price Up-Front, No Hidden Fees
• Great Prices You Can Trust
• Top Quality Workmanship, Guaranteed!
• Great Reputation & Reviews
• We’re friendly, personable and polite.
• Highly Experienced and Licenced Team
• Get a Quote With No obligation

Our Promise To You

At Gas Heating Service Melbourne we understand the discomfort of not having hot water. This is something that we would never want anyone to need to go through. That’s why we give such a high priority on emergencies with hot water. All of our plumbers are friendly and trustworthy We can assist you in all situations.

We pride ourselves on our customer service and it is our belief that the little things matter the most.

We pride ourselves on our outstanding customer service. Here’s why our clients appreciate us:

• We always arrive when we promise to be there.
• Our experts will give you the number to call them when they are 30 minutes away.
• Upfront competitive pricing and advice before we start the job.
• Always taking care to clean up after ourselves.

Our company Gas Heating Service Melbourne offer emergency and maintenance services for electrical, plumbing and heating. If at any time you have questions about our services, and the services we provide, we are here to help.