Split System Installation Officer

Split System Installation in Officer

There’s nothing better than coming to your home on a hot day of 40 degrees and flipping on your split-system air conditioning, and in a matter of minutes , your home and your family are cool.

Split system air-conditioning provides this versatility, which makes them tough to beat. Like all heaters and coolers that are required to run at their best they should be checked and maintained at a high level by qualified experts. Gas Heating Service Melbourne offers experienced technicians that know your split system air-conditioners in and out. They are experts in all makes and models of these units providing you with peace of mind that we are able to complete the task to a professional standard.

We offer a variety of services that comprise the following:

• Split System Installation Officer
• Split System Repairs
• Split System Servicing

Our team comprised of HVAC and Cooling experts are licensed and fully trained to handle all kinds of tasks. If you’re looking for split system installation Officer services then contact Local Heating and Cooling Professionals Officer today and talk with one of our helpful team members.

How Do Split Systems Operate?

Split air conditioning systems are their name due to half that system (condenser) is located outside of the house while the other portion (fan coil) is inside. While cooling, warm air from inside the room is absorbed by the fan coil and is then removed, which results in cool air recirculating back into the house. In reverse mode, it allows your heat pump run in reverse to provide heat on cold winter days.

The split system of air conditioning can be installed to specific rooms, zones or rooms that are connected via copper pipes into an outdoor unit (condenser). Multi-head split air conditioning systems are able to be fitted in as many as nine rooms with just one outdoor unit permitting separate temperature control for each room.

What Are The Running Costs With Split Systems?

One of the most recommended brands for Split Systems is Mitsubishi Electric. For an Mitsubishi Electric GE Series 2.5KW Split System, installed in an area that is small, and provides regular cooling and heating during the winter and summer periods and the annual running costs would be measured at $272.34.

Reducing the Split System Running Costs

It’s not hard to lower your running expenses by using the Split System. Depending on the model you purchase, and the star rating will determine just how much you will save each year. Beyond the initial cost to the way you utilize your Split System can help as well.

Tips For Using A Split System

• Set the thermostat between 24C and 26C to allow for cooling. Any degree lower than that will increase your running costs by approximately 10%..
• Make use of the economy setting if your split system has one. Also, you should regularly check the condition of your air conditioning.
• Make sure that the sun’s heat is kept out by closing curtains and blinds during the day. Close the doors and windows of areas that are cooled when it is split operating.
• When the split system has been turned off and the cooler is outside, open the doors or windows and let cool air flow in.
• Insulate your residence to prevent warm summer days out and cool in the winter months.
• Wear clothes that are appropriate for the weather conditions.

Why Select A Split System?

The wall mounted air conditioning system is the most frequently owned by homeowners who own a residential air conditioning system, as they are affordable and easily to maintain.

Inverter Technology

Inverter technology is the most effective way to enjoy more comfort throughout the year because it maintains an even temperature, helps save costs (less energy use) and produces a lesser amount of sound when it is utilized. This is achieved through setting the speed of rotation more precisely.

Affordable

Wall mounted Split AC system are best economical option for a single room apartment, small home or even a studio since they are inexpensive to buy (depending on the amount of indoor units you require) and they don’t require installation of ducts.

Independent Temperature Control

Each indoor unit is able to regulate the space it is installed in, which means that each room may have different temperature.

Air Quality

Many HVAC systems that are split feature air filters and humidity control mechanisms that regulate the amount of dust and humidity that can be found in the room. This can provide those with sensitive conditions (children and elderly, asthmatic or allergic customers) an ease of body and mind.

Multi-Head Split Systems

Multi-Head Split Systems allow multiple indoor units to be connected to one outdoor condenser, which provides the convenience of having the best AC (in terms of output and physical limitations) for the room you are in.

Split System FAQ

Is a split system the same as one would expect from an air conditioner?

Sure, Split System is an air conditioning system. But, the different kinds of air conditioning systems. It which include:

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Ducted refrigerated Air Conditioner

Each of these systems operates by using refrigerant and electricity. They all operate on the same principal but very different in term of installation.

How long does it take to install a split-system air conditioner?

In general an individual AC split installation is expected to take between 3-6 hours. The exact length of time can vary based upon a number of variables, including below;

• The size and location of both the outdoor and indoor unit
• The copper pipes are routed between the outdoor unit and the indoor unit
• Electrical connections from the main switchboards to A/C unit

More Split System FAQ's

Do I need to replace or fix the air conditioning unit in my home?

In most situation when your air conditioner is more than 10-years-old and has apparent issues with your air conditioner there’s a great possibility that it will be cheaper to replace rather than fix.

In order to help you make the best decision It is recommended to speak with the team at ComfyHome to give you an honest assessment on the condition of your AC.

What size split system air conditioning will I require?

A common measurement ratio is to multiply the size of the room by a factor of 0.15 to obtain the required power of the device in kilowatts.

For a room area of 40 square metres, you’ll require a split system air conditioning unit that is 6 kW. A unit with a cooling capacity of 2.5kW is suitable for 10-20 square meter room areas.

However, the size of the Split system’s air conditioning is also affected by other variables such as the insulation of the room, the number of occupants and residents’ location.

To make an accurate determination of the needed Split dimension, we suggest you contact us for a detailed analysis.

More Split System FAQ's

How long can an air conditioner split system last?

In general air conditioners are built to last from 10-20 years on average. But this depends on a lot of factors such as the model of the AC it is installed on, the quality of its installation, routine service history etc…

It is crucial to maintain your Split System Air Conditioner regularly to prolong lifetime and enhance efficiency.

What is the best frequency to clean my air conditioner air filter?

As per Daikin Australia, it is strongly recommended that you wash your air conditioner’s filters every two weeks to improve the efficiency of your system and possibly reduce energy consumption by 5 to 15 15%.

Officer Gas Heating Services

• Gas Heating Installation Officer
• Brivis Ducted Gas Heating Servicing & Repair Officer
• Evaporative Cooling Repair Officer
• Gas Log Fire Service & Repairs Officer
• Vulcan Ducted Gas Heating Servicing & Repair Officer
• Gas Hot Water System Installation & Repairs Officer
• Officer
• Braemar Ducted Gas Heating Servicing & Repair Officer
• Gas Heating Service Officer
• Carbon Monoxide Testing Officer
• Ducted Gas Heating Servicing & Repair Officer
• Gas Appliance Servicing & Repair Officer
• Gas Heating Repairs Officer
• Gas Heating Officer
• Gas Space Heater Repair Officer

What Types of Systems We Service & Repair

Every brand and type of heating comes with its specific operation and maintenance needs Our skilled technicians have the insight and experience to offer first rate services across all kinds of heaters which includes:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team has a wealth of experience in the field of heating repairs and maintenance, specialising in all styles and brands of heating equipment. We pride ourselves on a quick response time and commitment to efficiency, excellence and reliability.

We service and maintain all top brands of heating units and systems which include:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• Price Up-Front, No Hidden Fees
• Low Prices You Can Trust
• Professional Quality Workmanship Assurance
• Great Reviews & Reputation
• We’re personable and friendly
• Experienced & Licenced Team
• Get a Free Quote and No Obligation

Our Promise To You

At Gas Heating Service Melbourne we understand the difficulty of not having hot water. This is something that we would never want anyone to suffer through. That’s why we give the highest priority on emergencies with hot water. All of our experienced plumbers are trustworthy and friendly and without doubt, we can assist you in all situations.

We pride ourselves on our service to customers and it is our conviction that the little things matter the most.

We are proud of our great customer service, here’s why our customers appreciate us:

• We always arrive when we tell you we will.
• Our techs will give you a an appointment when they are thirty minutes away.
• Pricing upfront competitive and guidance prior to the start of the project.
• Always cleaning up after ourselves.

The staff at Gas Heating Service Melbourne offer emergency and maintenance services for electrical, plumbing and heating. If you are unsure about our services, and the services we can provide.