Split System Installation Ringwood

Split System Installation in Ringwood

There’s nothing better than arriving home on a hot day and turning on your split system air conditioning, and in a matter of minutes your house and family members are cool.

Split system air conditioning provides such the ability to be used in a variety of ways, making them difficult to beat. But like all heaters and coolers to keep them running optimally, they need to be maintained and serviced in a professional manner by experienced professionals. Gas Heating Service Melbourne offers experienced technicians who are familiar with split system air-conditioners in and out. They specialize in all models and models of these units giving you the assurance that we will complete the task to professional standards.

We provide a variety of services that include the following:

• Split System Installation Ringwood
• Split System Repairs
• Split System Servicing

Our team of heating and cooling professionals are licensed and fully trained to complete all types of work. If you’re looking for Split System Installation Ringwood services then contact Local Heating and Cooling Professionals Ringwood today and talk with one of our friendly team members.

How Do Split Systems Operate?

Systems for split air conditioners get their name because half of the system (condenser) located outside the house while the other portion (fan coil) is installed inside. In cooling, hot air that is inside the room is absorbed by the fan coil before being removed, resulting in cool air recirculating back into the home. Reverse cycle allows heating pumps to run in reverse to provide heat on cold winter days.

Systems for split air conditioners can be installed to specific rooms, zones or rooms that are connected via copper pipes into an outdoor unit (condenser). Multiple-headed split-air conditioning units can be set up in more than nine rooms with only one outdoor unit and allow for individual temperature control of each room.

What Are The Ongoing Costs With Split Systems?

One of our recommended brands to use for Split Systems is Mitsubishi Electric. For a Mitsubishi Electric GE Series 2.5KW Split System, installed in an unassuming room that provides regular cooling and heating throughout the winter and summer periods, the annual running cost is $272.34.

The reduction of Costs of Split Systems Operating Costs

It’s not hard to save on running expenses with the Split System. The model you buy, as well as its star rating will determine how much you can save annually. However looking beyond the initial cost and how you utilize the Split System can help as well.

Tips For Using Split Systems

• Set the thermostat to 24C and 26C to cool. Every degree lower during summer increases the running cost by 10%..
• Choose the economy option if your split system has one. You should also regularly maintain your air cooling system.
• Make sure that the sun’s heat is kept out by closing curtains as well as external blinds during the daytime. Close all doors and windows in areas that are being cooled while it is split on.
• When the split system has been shut off and the cooler outside, you can open doors along with windows, allowing cool air flow in.
• Insulate your home to keep warm summer days out and cool inside during winter.
• Dress to suit the weather conditions.

Why Choose Split Systems?

The wall mounted air conditioning system is the most commonly used residential air conditioning system because they’re affordable and easy to maintain.

Inverter Technology

Inverter technology is the mainstay for comfort all through all seasons since it ensures the temperature constant, cuts costs (less energy consumption) and generates less sound when it is it is used. This is achieved by controlling the compressor rotation speed more precisely.

Affordable

Wall-mounted split AC system are best cost-effective option for a single room, apartment or small house as they are relatively cheap to purchase (depending on the amount of indoor units you need) and do not require necessary duct work.

Independent Temperature Control

Each indoor unit has the ability to regulate the space it is situated within, and each space is able to have various temperature.

Air Quality

Many Split air conditioners come with air filtering and humidity control functions which control the amount dust and humidity that can be found in a room. This allows for sensitive customers (children older, asthmatic, or allergic users) an unwinding mind and body.

Multi-Head Split Systems

Multi-Head Split Systems allow different indoor units to connect to one outdoor condenser which provides the peace of mind that you have the perfect cooling system (in terms of output and physical constraints) for the room you are in.

Split System FAQ

Are split systems similar to one would expect from an air conditioner?

Sure, Split System includes an air-conditioning unit. However, there are different kinds of air conditioning systems. These which include:

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Air conditioners that are duct-fed refrigerated

Each system operates on electricity & refrigerant under the same principal but very different in term of installation.

What is the time frame to set up a split system air conditioner?

In general for a single AC split installation can last between 3 and 6 hours. However, the exact amount of time could vary based on many factors such as below;

• Location and size of both outdoor and indoor unit
• The routing of copper pipes between outdoor and indoor units
• Electrical connections from main switchboard up to the AC unit.

More Split System FAQ's

Do I need to replace or fix my cooling system?

In the majority of situations the air conditioner is more than 10 years of age and there are obvious issues with your AC there’s a great likelihood that it is cheaper to replace rather than fix.

To assist you in making the right decision, it is best to consult with the staff at ComfyHome to provide you with an honest assessment on the state of your air conditioner.

What size of split system air conditioning will I require?

A typical measurement ratio is to multiple the room area by a factor of 0.15 to get the needed power of the unit in kilowatt.

If you have a room size of 40sqm, you should require a split system air conditioning unit of 6 kW. A cooling unit of 2.5kW is perfect for 10-20 square meter room areas.

However, the size of the Split system’s air conditioning will also be dependent on other factors such as how well the insulation is in place, the amount of people residing there and’ position.

For a precise assessment of the Split dimension, please call us for a more detailed analysis.

More Split System FAQ's

How long can a split system air conditioner last?

In general the air conditioner is built to last from 10-20 years on an average. However, this is contingent upon a myriad of factors such as the manufacturer of the air conditioner, quality of the installation, regular service history, and more…

It is crucial to maintain your Split System Air Conditioner often to extend its lifespan and improve effectiveness.

Do I need to wash my air conditioner’s filter?

Based on Daikin Australia, it is strongly recommended to clean your air conditioning filters every two weeks in order to boost the system’s efficiency and potentially reduce your energy consumption by 5%-15 percent.

Ringwood Gas Heating Services

• Brivis Ducted Gas Heating Servicing & Repair Ringwood
• Gas Space Heater Repair Ringwood
• Gas Log Fire Service & Repairs Ringwood
• Gas Heating Ringwood
• Gas Appliance Servicing & Repair Ringwood
• Evaporative Cooling Repair Ringwood
• Ducted Gas Heating Servicing & Repair Ringwood
• Gas Heating Installation Ringwood
• Gas Heating Service Ringwood
• Gas Heating Repairs Ringwood
• Vulcan Ducted Gas Heating Servicing & Repair Ringwood
• Braemar Ducted Gas Heating Servicing & Repair Ringwood
• Gas Hot Water System Installation & Repairs Ringwood
• Carbon Monoxide Testing Ringwood
• Ringwood

What Types of Systems We Service & Repair

Every brand and type of heating has it’s specific operation and maintenance needs Our highly skilled technicians have the knowledge and expertise to provide top-quality services on all types of heating equipment for example:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team has a wealth of experience in repairs and maintenance of heating systems that specialize in all kinds and types of heating systems. We pride ourselves on having a rapid response time and dedication to excellence, efficiency , and reliability.

We service and maintain all top brands of heating units and systems which include:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• Price Up-Front, No Hidden Fees
• Great Prices You Can Trust
• Quality Workmanship Guaranteed
• Excellent Reviews & Reputation
• We’re friendly and personable.
• Highly Experienced and Licenced Team
• Get a Quote Without Obligation

Our Promise To You

At Gas Heating Service Melbourne we understand the discomfort of not having hot water. This is something that we would never want anyone to be forced to endure. This is why we put such a high priority on emergencies with hot water. All of our plumbers are trustworthy and friendly and without doubt, we can assist you in any situation.

We take pride in the quality of our customer service. It is our firm belief that the minor things matter most.

We are proud of our outstanding customer service. this is why our customers love us:

• We always arrive when we say we will.
• Our techs will give you a a call when they are thirty minutes away.
• Upfront competitive pricing and advice before we even begin the job.
• Always getting our hands clean after our own mess.

We at Gas Heating Service Melbourne offer emergency and maintenance services for electrical, plumbing and heating. If at any time you have questions about our services and the products we offer.