Split System Installation South Wharf

Split System Install in South Wharf

There’s nothing better than arriving home on a hot 40-degree day, switching on your split system air-conditioning and within a matter of minutes your house and your family will be cool.

Split system air conditioning offers this versatility, making them hard to beat. But like all heaters and coolers that are required to run optimally it is essential to have them serviced and maintained in a professional manner by qualified experts. Gas Heating Service Melbourne offers experienced technicians that know your split system air-conditioners from top to bottom. They are experts in all makes and models of these units giving you the assurance that they can get the job done at a professional level.

We offer a wide range of services, which include the following:

• Split System Installation South Wharf
• Split System Repairs
• Split System Servicing

Our team comprised of HVAC and Cooling experts are licensed and fully trained to handle all kinds of work. If you are looking for split system installation South Wharf services then contact Local Heating and Cooling Professionals South Wharf today and talk with one of our friendly team members.

How Do Split Systems Work?

The split systems of air conditioning have their name because of half this system (condenser) being located outside the house , while the second half (fan coil) is installed inside. In cooling, warm air in the room is brought in from the fan coil, and then eliminated, resulting in cool air being recirculated back into the house. Reverse cycle allows your heat pump run in reverse to provide heating on cold winter days.

Air conditioning split systems can be fitted to individual rooms, areas or multiple rooms that are connected via copper pipes to an outdoor unit (condenser). Split air conditioners with multiple heads can be set up for at least nine rooms using just one outdoor unit as well as allowing an individual temperature control for each room.

What Are The Ongoing Costs For Split Systems?

One of our recommended brands to use for Split Systems is Mitsubishi Electric. If you are looking for an Mitsubishi Electric GE Series 2.5KW Split System, installed in an unassuming room that provides regular heating & cooling during the winter and summer periods and the annual running costs would be measured at $272.34.

Reducing the Split System Running Costs

It’s not hard to save on running expenses by using the Split System. Depending on the model that you purchaseand its star rating will determine how much you will save each year. Beyond the initial price to how you make use of it Split System can help as well.

Guide to Using A Split System

• Set the thermostat between 24C and 26C to allow for cooling. Every degree lower in summer will increase the running costs by 10%..
• Use the economy setting If your split system comes with one. Ensure that you regularly service your air conditioning.
• Keep the sun’s heat away by closing the curtains and exterior blinds during the day. Close doors and windows to areas that are being cooled while your split systems are operating.
• When the split system has been shut off and the cooler outside, it is recommended to open the doors or windows and let cool air in.
• Insulate your property to help keep summer heat out and the cold inside in winter.
• Dress according to the weather.

Why Choose Split Systems?

Split air conditioners mounted on walls are the most commonly used residential air conditioning system because they are cost-effective and easily to maintain.

Inverter Technology

Inverter technology is the best option for greater comfort throughout the year since it keeps an even temperature, helps save costs (less energy consumption) and generates less sound when it is it is used. This is accomplished by controlling the compressor rotation speed more precisely.

Affordable

Wall-mounted split AC system are best economical option for a single room or apartment as they are relatively cheap to purchase (depending on the number of indoor units you need) and they don’t require duct work required.

Independent Temperature Control

Each indoor unit has the ability to control the temperature of the room it is located in, thus each room is able to have different temperature.

Air Quality

Many Split air conditioners have air filters and humidity control mechanisms that control the amount of dust and humidity that can be found in the space. This provides those with sensitive skin (children and elderly, asthmatic or allergic consumers) peace of body and mind.

Multi-Head Split Systems

Multi-Head Split Systems allow different indoor units to connect to one outdoor condenser that in turn provides you with the peace of mind that you have the most suitable Air conditioner (in terms of output and physical limitations) for the room you are in.

Split System FAQ

Are split systems similar to an air conditioner?

It is true that Split System has an air-conditioning system. However, there are different types of air conditioning system that include

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Air conditioners that are duct-fed refrigerated

Each system operates on electricity & refrigerant under the same principal but very different in term of installation.

How long does it take to install a split system air conditioner?

Generally speaking for a single split-system air conditioner installation is expected to last between 3 and 6 hours. However, the exact amount of time could vary based on a variety of factors, such as below;

• Dimensions and position of both indoor and outdoor unit
• Copper pipes that are routed between the outdoor unit and indoor unit
• Electrical connections from the main switchboard up to the AC unit.

More Split System FAQ's

Do I need to replace or fix the air conditioning unit in my home?

In the majority cases the A/C is more than 10-years-old and there are obvious issues with your AC, there is a good possibility that it will be cheaper to replace rather than fix.

To assist you in making the right choice It is recommended to speak with the team at ComfyHome to provide you with an honest evaluation of the state of your air conditioner.

What size of split system air conditioning do I need?

A typical measure ratio would be to multiply the room area by a factor of 0.15 to get the needed power of the device in kilowatts.

If you have a room size of 40 square metres, you’ll have a Split system air conditioning unit with 6 kW. A unit that can cool the air at 2.5kW is perfect for rooms with 10-20 square meters. spaces.

However, the amount of the Split system’s required air conditioning can be affected by other factors like the insulation of the room, the size of the room, and’ place of residence.

For an accurate assessment of the required Split dimension, we suggest that you call us for a more detailed analysis.

More Split System FAQ's

How long does a split system air conditioner last?

In general the air conditioner is built to last from 10-20 years on average. But this depends on a lot of elements, such as the model of the AC as well as the quality of the installation, routine maintenance history etc…

It is important to service the Split System air conditioner regularly for a longer life span and to increase effectiveness.

Do I need to wash my air conditioner’s filter?

Based on Daikin Australia, it is strongly recommended to wash your air conditioner’s filters every 2 weeks to increase the efficiency of your system and possibly reduce your energy consumption by 5 to 15 percent.

South Wharf Gas Heating Services

• South Wharf
• Carbon Monoxide Testing South Wharf
• Gas Appliance Servicing & Repair South Wharf
• Vulcan Ducted Gas Heating Servicing & Repair South Wharf
• Gas Heating Repairs South Wharf
• Evaporative Cooling Repair South Wharf
• Gas Heating Service South Wharf
• Braemar Ducted Gas Heating Servicing & Repair South Wharf
• Gas Space Heater Repair South Wharf
• Gas Heating South Wharf
• Brivis Ducted Gas Heating Servicing & Repair South Wharf
• Ducted Gas Heating Servicing & Repair South Wharf
• Gas Log Fire Service & Repairs South Wharf
• Gas Hot Water System Installation & Repairs South Wharf
• Gas Heating Installation South Wharf

What Types of Systems We Service & Repair

Each brand and style of heating system has its individual operation and maintenance requirements Our highly skilled technicians have the insight and know how to provide first rate services for all heating systems which includes:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team is well-versed and has years of experience in heating repairs and maintenance and specialize in all types and brands of heating equipment. We take pride in a fast response time and dedication to quality, efficiency and reliability.

We can service and maintain all top brands of heating units and systems that include:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• Price Up-Front, No Hidden Fees
• Competitive Prices You Can Trust
• Top Quality Workmanship, Guaranteed!
• Excellent Reputation & Reviews
• We’re personable and friendly
• Professionally trained and licensed team
• Get a Quote With No obligation

Our Promise To You

At Gas Heating Service Melbourne we understand the difficulty of not having hot water, and it’s something we believe no one should need to go through. This is why we place top priority on emergencies with hot water. All of our plumbers are trustworthy and friendly and without doubt, we will be able to assist with any emergency.

We take pride in our customer service and it is our belief that the little things matter the most.

We pride ourselves on our outstanding customer service. and here’s the reason our customers are so happy with us:

• We always arrive when we tell you we will.
• Our techs will give you a a call when they are 30 minutes away.
• Pricing upfront competitive and guidance prior to the start of the project.
• Always taking care to clean up after us.

The staff at Gas Heating Service Melbourne offer emergency and maintenance services in plumbing, heating, and electrical. If at any time you have some questions about our services and the products we provide, we are here to help.