Split System Installation St Kilda

Split System Installation in St Kilda

There’s nothing more enjoyable than coming home to a day of 40 degrees and activating your split system air conditioning and in just a couple of seconds, the house and your family will be cool.

Split system air conditioning provides such the ability to be used in a variety of ways, making them difficult to beat. However, like all heaters and coolers to keep them running at their peak it is essential to have them serviced and maintained in a professional manner by skilled professionals. Gas Heating Service Melbourne offers experienced technicians who know your split system air-conditioners both inside and outside. They specialize in all models and models offering you assurance that we will complete the task to professional standards.

We provide a range of services that include the following:

• Split System Installation St Kilda
• Split System Repairs
• Split System Servicing

Our team of professionals in the field of heating and cooling is licensed and qualified for all sorts of tasks. If you’re searching for [keywords lower] St Kilda services then contact Local Heating and Cooling Professionals St Kilda today and talk to one of our knowledgeable team members.

How Do Split Systems Work?

The split systems of air conditioning earn the name because of one half of this system (condenser) being outside the house while the other portion (fan coil) is inside. When it cools, warm air inside the room is taken in by the fan coil before being taken out, resulting into cool air recirculating back into the home. While reverse cycle allows for the heat pump to run in reverse in order to provide warmth on cold winter days.

Split air conditioning systems are installed in individual rooms, areas or multiple rooms linked by copper pipe into an outdoor unit (condenser). Systems with multi-head splits can be installed for more than nine rooms with just one outdoor unit and allow for the control of temperature for each room.

What Are The Running Costs For Split Systems?

One of the most recommended brands to use for Split Systems is Mitsubishi Electric. If you are looking for a Mitsubishi Electric GE Series 2.5KW Split System, installed in an unassuming room that provides regular cooling and heating throughout the summer and winter time, the annual running cost would be measured at $272.34.

The reduction of the Split System Running Costs

It doesn’t take much to reduce your running costs by using a Split System. Based on the model you buy, as well as its star rating will determine how much you will save each year. It is important to look beyond the initial price to how you use the Split System can help as well.

Guide to Using Split Systems

• Set the thermostat to 24C and 26, which is the ideal temperature for cooling. Each degree less in summer will increase your running costs by 10%..
• Choose the economy option If your split system comes with one. You should also regularly maintain your air conditioner.
• Make sure that the sun’s heat is kept out by closing the curtains and exterior blinds in the morning. Close windows and doors to areas that are cooling when the split system is running.
• When the split system has been switched off , and the cooler outside, open doors as well as windows in order to let the cool air in.
• Insulate your house to block cool summer air out and keep the heat in during winter.
• Wear clothes that are appropriate for the weather conditions.

Why Choose Split Systems?

Wall mounted split air conditioning systems are the most widely owned by homeowners who own a residential air conditioning system, as they are affordable and easily to maintain.

Inverter Technology

Inverter technology is your mainstay for comfort all through the year as it maintains an even temperature, helps save costs (less consumption of energy) and produces relatively less noise when used. This is achieved by control of the compressor’s rotation speed more precisely.

Affordable

Wall-mounted split AC units are your best affordable option for a one room apartment, small home or even a studio as they are comparatively inexpensive to purchase (depending on how many indoor units you’ll need) and do not require necessary duct work.

Independent Temperature Control

Each indoor unit has the ability to regulate the space it is placed in, which means that each room may have various temperature.

Air Quality

Many split air conditioning systems feature air filtering and humidity control functions which regulate the amount of dust and humidity in the room. This provides those with sensitive skin (children and elderly, asthmatic or allergic consumers) the peace of body and mind.

Multi-Head Split Systems

Multi-Head Split Systems allow multiple indoor units to connect to one outdoor condenser which provides the peace of mind that you have the perfect Air conditioner (in terms of physical and output constraints) to a specific space.

Split System FAQ

Is a split system the same as the air conditioning?

Yes, Split System has an air-conditioning system. There are various types of air conditioning system includes;

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Ducted refrigerated Air Conditioner

Each of these systems operates by using refrigerant and electricity. They all operate on the same principle but they are different in terms of how they are installed.

How long does it take to install a split-system air conditioner?

Generally speaking, a single split system air conditioning installation should take between 3-6 hours. But, the exact amount of time can vary based on many factors such as below:

• The size and location of both indoor and outdoor unit
• Copper pipes that are routed between outdoor and indoor units
• Electrical connections from the main switchboards to A/C unit.

More Split System FAQ's

Should I replace or repair my AC unit?

In most situation when your air conditioner is over > 10 years of age and you have apparent issues with your air conditioner, there is a good chance that it could be cheaper to replace rather than fix.

In order to help you make the best decision It is recommended to contact the experts at ComfyHome to get an honest assessment on the state of your air conditioner.

What size of split system air conditioning do I need?

A standard measurement ratio is to multiple the area of the room by a ratio of 0.15 to obtain the required power of the unit in Kilowatts.

For a room area of 40 square meters, you will have a Split system air conditioning unit with 6 kW. A unit with a cooling capacity of 2.5kW is ideal for 10 -20 sqm room spaces.

However, the amount of the Split system’s air conditioning requirements can be dependent on other factors such as the insulation of the room, the number of occupants and residents’ location.

To get an accurate estimate of the necessary Split unit size, we recommend you contact us for a detailed analysis.

More Split System FAQ's

How long does an air conditioner split system last?

In general air conditioners are designed to last between 10 and 20 years in the average. But it depends on heaps of factors such as the brand of the A/C, quality of the installation, routine service history etc…

It is vital to check the maintenance of Your Split System AC regularly to prolong lifetime and enhance efficiency.

What is the best frequency to clean my air conditioner’s filter?

As per Daikin Australia, it is strongly recommended to wash your air conditioner’s filters every two weeks to improve the system’s efficiency and potentially reduce your energy consumption by 5 to 15 percent.

St Kilda Gas Heating Services

• Gas Appliance Servicing & Repair St Kilda
• Carbon Monoxide Testing St Kilda
• Braemar Ducted Gas Heating Servicing & Repair St Kilda
• Brivis Ducted Gas Heating Servicing & Repair St Kilda
• Gas Hot Water System Installation & Repairs St Kilda
• Ducted Gas Heating Servicing & Repair St Kilda
• Vulcan Ducted Gas Heating Servicing & Repair St Kilda
• Gas Heating St Kilda
• Gas Space Heater Repair St Kilda
• Evaporative Cooling Repair St Kilda
• Gas Heating Installation St Kilda
• Gas Heating Service St Kilda
• St Kilda
• Gas Heating Repairs St Kilda
• Gas Log Fire Service & Repairs St Kilda

What Types of Systems We Service & Repair

Every brand and type of heating system has its specific operation and maintenance needs Our highly skilled technicians are knowledgeable and experience to offer excellent services to all systems of heating including:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team is well-versed and has years of experience in the field of heating repairs and maintenance and specialize in all types and brands of heating equipment. We pride ourselves on having a fast response time and dedication to efficiency, excellence and reliability.

We service and maintain the majority of important brands of heating systems and units that include:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• Price Up-Front, No Hidden Fees
• Low Prices You Can Trust
• Professional Quality Workmanship Assurance
• Excellent Reputation & Reviews
• We’re friendly and personable.
• A Team of Experienced and Licenced Professionals
• Get a Free Quote and No Costs

Our Promise To You

At Gas Heating Service Melbourne we understand the difficulty of not having hot water, and it’s something we believe no one should need to go through. This is why we put top priority on hot water emergencies. All of our plumbers are courteous and reliable We can assist with any emergency.

We are proud of our service to customers and it is our firm belief that the tiny things are the most important.

We pride ourselves on our outstanding customer service. this is why our customers are so happy with us:

• We will always be there when we promise to be there.
• Our staff will give you a call when they are 30 minutes away.
• Upfront competitive pricing and advice before we start the job.
• Always taking care to clean up after ourselves.

Our company Gas Heating Service Melbourne offer emergency and maintenance services in electrical, plumbing and heating. If you have any questions regarding our services, and the services we provide, we are here to help.