Split System Installation Ashwood

Split System Installation in Ashwood

There’s nothing more satisfying than coming to your home on a hot day of 40 degrees and flipping on your split-system air conditioning and in just a couple of minutes , your home and your family will be cool.

Split system air-conditioning provides this the ability to be used in a variety of ways, making them difficult to beat. However, like all heaters and coolers to make sure they’re running to their maximum, they need to be maintained and maintained at a high level by qualified professionals. Gas Heating Service Melbourne offers experienced technicians who know split system air conditioners both inside and outside. They are experts in all makes and models of these units providing you with assurance that we are able to complete the task at a professional level.

We provide a range of different Split System Installation services which include the following:

• Split System Installation Ashwood
• Split System Repairs
• Split System Servicing

Our team of professionals in the field of heating and cooling are licensed and certified to perform all kinds of tasks. If you’re looking for split system installation Ashwood services then contact Local Heating and Cooling Professionals Ashwood today and talk with one of our friendly team members.

How Do Split Systems Operate?

The split systems of air conditioning have their name due to half this system (condenser) is located outside of the house , while the other part (fan coil) is located inside. While cooling, warm air in the room is drawn in via the fan coil and eliminated, resulting in cool air being recirculated back into the house. The reverse cycle permits that the heating system to run in reverse to provide heating in cold weather.

Split air conditioning systems can be installed to specific rooms, areas or multiple rooms linked by copper pipe with an outside unit (condenser). Multi-head split air conditioning systems can be set up in up to nine rooms using only one outdoor unit permitting individual temperature control of each room.

What Are The Ongoing Costs For Split Systems?

One of the most recommended brands to use for Split Systems is Mitsubishi Electric. If you are looking for the Mitsubishi Electric GE Series 2.5KW Split System, installed in the smallest of rooms, providing regular cooling and heating throughout the winter and summer periods and the annual running costs would be $272.34.

The reduction of the Split System Running Costs

It’s easy to lower your running expenses by using a Split System. Depending on the model that you purchaseand its star rating, you will be able to determine how much you will save each year. It is important to look beyond the initial price to how you use your Split System can help as well.

Tips For Operating A Split System

• Set the thermostat between 24C and 26C to cool. Every degree lower during summer increases the running cost by 10%..
• Make use of the economy setting when your split has one. Ensure that you regularly service your air conditioner.
• Keep the sun’s heat out by closing curtains and external blinds in the morning. Close doors and windows to areas that are being cooled while it is split on.
• If the split system is turned off and the cooler is outside, you can open doors or windows and let the cool air in.
• Insulate your home to keep the summer heat out and the cold inside during winter.
• Wear clothes that are appropriate for the weather.

Why Choose Split Systems?

The wall mounted air conditioning system is the most commonly used residential air conditioning system because they’re affordable and easy to maintain.

Inverter Technology

Inverter technology is your best option for greater comfort throughout the year since it keeps an even temperature, helps save costs (less consumption of energy) and produces a lesser amount of sound when it is employed. This is achieved by managing the speed of the compressor more precisely.

Affordable

Wall mounted wall mounted split AC units are your best cost-effective option for a single room or apartment as they are relatively cheap to buy (depending on the amount of indoor units you will require) and do not require requirement for ductwork.

Independent Temperature Control

Each indoor unit has the ability to control the area it is located in, thus each room may have different temperatures.

Air Quality

A lot of HVAC systems that are split feature air filtering and humidity control functions which control the amount dust and humidity in a room. This allows for sensitive customers (children and elderly, asthmatic or allergic customers) an ease of body and mind.

Multi-Head Split Systems

Multi-Head Split Systems enable multiple indoor units to connect to a single outdoor condenser which in turn gives you satisfaction of having the most suitable Air conditioner (in terms of output and physical constraints) to a specific space.

Split System FAQ

Is a split system the same thing as one would expect from an air conditioner?

Absolutely, Split System can be described as an air conditioner system. However, there are many types of air conditioning system that include

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Ducted refrigerated Air Conditioner

All these systems operate with refrigerant and electricity under the same principles, however they are different in term of installation.

How long does it take to install a split-system air conditioner?

In general, a single AC split installation should take between 3-6 hours. However, the exact amount of time may vary based upon a number of variables, including below:

• The size and location of both outdoor and indoor unit
• The copper pipes are routed between indoor and outdoor unit
• Electrical connections from main switchboards to A/C unit.

More Split System FAQ's

Should I replace or repair the air conditioning unit in my home?

In most situation in the event that your air conditioner is at least 10 years old and there are noticeable issues with your A/C there’s a good chance that it could be cheaper to replace rather than fix.

For help in making the best decision It is recommended to contact the experts at ComfyHome to provide you with an honest assessment on the condition of your air conditioner.

What size of split system air conditioner do I need?

A typical measuring ratio will multiply the size of the room by a ratio of 0.15 in order to determine the power of the measurement unit in kilowatts.

For a room area of 40sqm, you should have a Split air conditioning system of 6 kW. An air conditioning unit of 2.5kW is suitable for 10-20 square meter room spaces.

However, the amount of the Split system’s required air conditioning can be affected by other variables such as the insulation in the room, the size of the room, and’ place of residence.

To make an accurate determination of the needed Split dimension, we suggest you contact us for a detailed analysis.

More Split System FAQ's

How long will an air conditioner split system last?

In general, an air conditioner is built to last from 10-20 years on average. However, this is contingent upon a myriad of things like the brand of the A/C it is installed on, the quality of its installation, regular service history, etc…

It is vital to check the maintenance of your split system air conditioner on a regular basis to extend its life and increase efficiency.

Do I need to clean the air conditioner’s air filter?

In accordance with Daikin Australia, it is strongly recommended that you clean your air conditioning filters every 2 weeks to increase the efficiency of the system and reduce energy consumption by 5 to 15 15%.

Ashwood Gas Heating Services

• Carbon Monoxide Testing Ashwood
• Brivis Ducted Gas Heating Servicing & Repair Ashwood
• Gas Heating Ashwood
• Gas Heating Repairs Ashwood
• Gas Heating Service Ashwood
• Gas Log Fire Service & Repairs Ashwood
• Vulcan Ducted Gas Heating Servicing & Repair Ashwood
• Ashwood
• Ducted Gas Heating Servicing & Repair Ashwood
• Gas Appliance Servicing & Repair Ashwood
• Gas Hot Water System Installation & Repairs Ashwood
• Gas Heating Installation Ashwood
• Gas Space Heater Repair Ashwood
• Braemar Ducted Gas Heating Servicing & Repair Ashwood
• Evaporative Cooling Repair Ashwood

What Types of Systems We Service & Repair

Each model and brand of heating has it’s own operation and maintenance Our highly skilled technicians have the knowledge and know how to provide excellent services across all kinds of heaters, which includes:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team has years of experience in repairs and maintenance of heating systems with a focus on all models and types of heating systems. We are proud of our fast response time and dedication to quality, efficiency and reliability.

We are able to service and maintain the majority of important brands of heating systems and units which include:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• No Hidden Fees, Price Up Front
• Great Prices You Can Trust
• High-Quality Workmanship Guaranteed
• Excellent Reviews & Reputation
• We’re friendly, personable and polite.
• Professionally trained and licensed team
• Get a Free Quote and No Obligation

Our Promise To You

We at Gas Heating Service Melbourne we understand the discomfort of not having hot water and it’s something we don’t think anyone should have to experience. That’s why we give such a high priority for hot water emergencies. Our plumbers are courteous and reliable We will be able to assist with any emergency.

We are proud of our customer service and it is our belief that the tiny things are the most important.

We take pride in our exceptional customer service. here’s why our customers appreciate us:

• We will always be there when we declare that we will.
• Our experts will give you a call when they are thirty minutes away.
• Pricing upfront competitive and guidance before we start the job.
• Always getting our hands clean after us.

At Gas Heating Service Melbourne offer emergency and maintenance services for plumbing, electrical, and heating. If you have questions about our services and what we can offer, please contact us.