Split System Installation Glen Waverley

Split System Installation in Glen Waverley

There’s nothing more satisfying than coming to your home on a hot 40 degree day flipping on your split-system air conditioning and in just a couple of minutes the house and your family is cool.

Split system air-conditioning offers such the ability to be used in a variety of ways, making them difficult to beat. However, like all heaters and coolers, to ensure they are operating optimally it is essential to have them maintained and serviced to a high standard by qualified experts. Gas Heating Service Melbourne offers experienced technicians that know your split system air conditioners from top to bottom. They are experts in all makes and models of these units providing you with confidence that we will finish the job to a professional standard.

We provide a variety of services, which include the following:

• Split System Installation Glen Waverley
• Split System Repairs
• Split System Servicing

Our team comprised of HVAC and Cooling experts is licensed and qualified to perform all kinds of work. If you are looking for split system installation Glen Waverley services then contact Local Heating and Cooling Professionals Glen Waverley today and talk to one of our knowledgeable team members.

How Do Split Systems Operate?

The split systems of air conditioning have their name due to half this system (condenser) located outside the home, while the other part (fan coil) is installed inside. When cooling, the warm air inside the room is absorbed by the fan coil before being removed, resulting in cool air recirculating back into the house. The reverse cycle permits heating pumps to run in reverse in order to provide warmth on cold winter days.

Air conditioning split systems are fitted to individual rooms, areas , or rooms that are connected via copper pipes connecting to the outdoor unit (condenser). Systems with multi-head splits can be used for up to nine rooms using just one outdoor unit as well as allowing separate temperature control for each room.

What Are The Ongoing Costs With Split Systems?

One of the top brands that we recommend for Split Systems is Mitsubishi Electric. If you are looking for the Mitsubishi Electric GE Series 2.5KW Split System, installed in an area that is small, and provides regular heating & cooling during the summer and winter seasons The annual operating cost would be $272.34.

Reduced Split System Operating Costs

It’s not difficult to cut down on your operating costs by using the Split System. The model you purchase, and it’s respective star rating, you will be able to determine how much you’ll save per year. It is important to look beyond the initial cost and how you make use of the Split System can help as well.

Tips For Using A Split System

• Set the thermostat to 24C and 26C for cooling. Each degree less in summer will raise the cost of running by 10%..
• Use the economy setting in the event that your split system is equipped with one and regularly service your air conditioning.
• Keep the sun’s heat out by closing curtains and external blinds in the morning. Close the doors and windows of areas that are being cooled while it is split operating.
• When the split system is shut off and the cooler outside, it is recommended to open the doors and windows to let the cool air in.
• Insulate your residence to prevent summer heat out and the cold inside during winter.
• Dress to suit the weather conditions.

Why Choose A Split System?

Split air conditioners mounted on walls are the most frequently used residential air conditioning system because they’re affordable and easy to maintain.

Inverter Technology

Inverter technology is the key to more comfort throughout all seasons since it ensures an even temperature, helps save costs (less consumption of energy) and generates less sound when it is utilized. This is accomplished by controlling the compressor rotation speed more precisely.

Affordable

Wall-mounted divided AC models are most affordable option for a one room or apartment as they are relatively cheap to buy (depending on the number of indoor units you’ll need) and do not require duct work required.

Independent Temperature Control

Each indoor unit is able to control the room that it is located within, and each space is able to have different temperatures.

Air Quality

A lot of AC splits include air filtering and humidity control functions which regulate the amount of dust and humidity inside a room. This provides those with sensitive skin (children older, asthmatic, or allergic users) the peace of mind and body.

Multi-Head Split Systems

Multi-Head Split Systems allow different indoor units to connect to a single outdoor condenser which provides the comfort of having the ideal cooling system (in terms of output and physical limitations) for the room you are in.

Split System FAQ

Are split systems the same as an air conditioner?

It is true that Split System includes an air-conditioning unit. However, there are many kinds of air conditioning systems. It which include:

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Ducted refrigerated air conditioner

All of them operate by using refrigerant and electricity. They all operate on the same principal but very different in terms of how they are installed.

How long will it take to install a split-system air conditioner?

In general the typical split air conditioning system installation should take 3-6 hours. However, the exact amount of time may vary based on a variety of factors, such as below:

• Size and location of both indoor and outdoor unit
• The route of copper pipes between the outdoor unit and the indoor unit
• Electrical connections from main switchboard to the A/C unit

More Split System FAQ's

Do I need to replace or fix my AC unit?

In the majority cases the air conditioner is more than 10 years old and has noticeable issues with your A/C, there is a good chance that it’s more affordable to replace than repair.

To assist you in making the best decision To make the right choice, contact the experts at ComfyHome to get an honest evaluation of the condition of your air conditioner.

What size of split system air conditioner do I need?

A common measure ratio would be to multiple the space by a ratio of 0.15 to get the needed power of the measurement unit in kilowatts.

If you have a room size of 40sqm, you should require a split system air conditioning unit that is 6 kW. A unit with a cooling capacity of 2.5kW is the ideal size for 10-20 sqm rooms areas.

However, the size of the Split system’s air conditioning is also dependent on other factors such as the insulation of the room, the number of occupants and residents’ locations.

To make an accurate determination of the necessary Split unit size, we suggest that you contact us for a comprehensive analysis.

More Split System FAQ's

How long can a split system air conditioner last?

In general, an air conditioner is built to last from 10-20 years, on average. But it depends on heaps of factors such as the model of the AC it is installed on, the quality of its installation, the routine maintenance history and more…

It is vital to check the maintenance of your Split System Air Conditioner often to extend its lifespan and improve effectiveness.

When should I wash my air conditioner’s air filter?

As per Daikin Australia, it is strongly recommended to wash your air conditioner’s filters every two weeks to improve the system’s efficiency and potentially decrease your energy use by 5%-15 15%.

Glen Waverley Gas Heating Services

• Gas Appliance Servicing & Repair Glen Waverley
• Evaporative Cooling Repair Glen Waverley
• Braemar Ducted Gas Heating Servicing & Repair Glen Waverley
• Brivis Ducted Gas Heating Servicing & Repair Glen Waverley
• Gas Log Fire Service & Repairs Glen Waverley
• Ducted Gas Heating Servicing & Repair Glen Waverley
• Vulcan Ducted Gas Heating Servicing & Repair Glen Waverley
• Gas Heating Service Glen Waverley
• Carbon Monoxide Testing Glen Waverley
• Gas Heating Installation Glen Waverley
• Gas Heating Glen Waverley
• Gas Hot Water System Installation & Repairs Glen Waverley
• Gas Heating Repairs Glen Waverley
• Glen Waverley
• Gas Space Heater Repair Glen Waverley

What Types of Systems We Service & Repair

Each type and brand of heating comes with its own operation and maintenance Our experienced technicians are knowledgeable and know how to provide excellent services for all heating systems for example:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team has years of experience with heating repair and maintenance that specialize in all kinds and brands of heating equipment. We pride ourselves on having a rapid response time as well as a commitment to excellence, efficiency and reliability.

We can service and maintain all important brands of heating systems and units, including:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• No Hidden Fees, Price Up Front
• Low Prices You Can Trust
• Professional Quality Workmanship Assurance
• Great Reviews & Reputation
• We’re friendly, personable and polite.
• A Team of Experienced and Licenced Professionals
• Get a Free Quote and No obligation

Our Promise To You

We at Gas Heating Service Melbourne we understand the difficulty of not having hot water. This is something we believe no one should suffer through. This is the reason we place such a high priority on emergencies with hot water. Our plumbers are courteous and reliable We will be able to help you in any circumstance.

We pride ourselves on our customer service and it is our firm belief that the little things matter the most.

We pride ourselves on our great customer service, and here’s the reason our customers love us:

• We always show up when we promise to be there.
• Our experts will give you an appointment when they are thirty minutes away.
• Upfront competitive pricing and advice before we start the job.
• Always taking care to clean up after us.

We at Gas Heating Service Melbourne offer emergency and maintenance services for plumbing, electrical and heating. If you have questions about our services and what we provide, we are here to help.