Split System Installation Kallista

Split System Installation in Kallista

There’s nothing better than arriving to your home on a hot 40 degree day activating your split system air conditioning, and in a matter of minutes , your home and your family are cool.

Split system air conditioning provides such versatility, making them hard to beat. But , just like all heaters or coolers that are required to run at their best, they need to be serviced and maintained at a high level by experienced professionals. Gas Heating Service Melbourne offers experienced technicians that know your split system air conditioners from top to bottom. They specialize in all models and models of these units giving you the confidence that we will finish the job in a professional manner.

We provide a variety of services that comprise the following:

• Split System Installation Kallista
• Split System Repairs
• Split System Servicing

Our team comprised of HVAC and Cooling experts are fully qualified and licensed for all sorts of work. If you’re looking for Split System Installation Kallista services then contact Local Heating and Cooling Professionals Kallista today and talk with one of our helpful team members.

How Do Split Systems Work?

Systems for split air conditioners get their name because half of this system (condenser) being outside the house , while the other portion (fan coil) is installed inside. When cooling, the warm air in the room is drawn in through the fan coil and removed, resulting in cool air being recirculated back into the house. Reverse cycle allows your heat pump run in reverse in order to provide warmth on cold winter days.

The split system of air conditioning can be placed in rooms, areas , or rooms connected by copper piping to an outdoor unit (condenser). Systems with multi-head splits can be installed in more than nine rooms with only one outdoor unit and allow for separate temperature control for each room.

What Are The Running Costs With Split Systems?

One of the most recommended brands of Split Systems is Mitsubishi Electric. For the Mitsubishi Electric GE Series 2.5KW Split System, installed in the smallest of rooms, providing regular cooling and heating during the winter and summer periods and the annual running costs would be measured at $272.34.

Lowering split system Operating Costs

It’s not difficult to reduce your running costs with a Split System. Depending on the model you buy, as well as its star rating will determine how much you will save each year. However looking beyond the initial cost to the way you make use of the Split System can help as well.

Tips For Using A Split System

• Set the thermostat to 24C and 26, which is the ideal temperature for cooling. Every degree lower during summer will increase your running costs by about 10%..
• Choose the economy option when your split has one. Ensure that you regularly service your air cooling system.
• Make sure that the sun’s heat is kept out by closing curtains as well as external blinds during the day. Close all doors and windows in areas that are being cooled while your split systems are on.
• When the split system has been switched off and its cooler outside, open the doors and windows to let cool air circulate.
• Insulate your residence to prevent the heat out in summer and in during winter.
• Dress according to the weather.

Why Select Split Systems?

Wall mounted split air conditioning systems are the most commonly owned residential air conditioning system since they are inexpensive and simple to maintain.

Inverter Technology

Inverter technology is your key to more comfort throughout the year because it maintains a constant temperature, saves costs (less energy use) and generates less sound when it is used. This is achieved through control of the compressor’s rotation speed more precisely.

Affordable

Wall-mounted Split AC system are best budget option for a small room or apartment since they are inexpensive to purchase (depending on the number of indoor units you need) and don’t need installation of ducts.

Independent Temperature Control

Each indoor unit has the ability to control the temperature of the room it is situated in, which means that each room can have a different temperature.

Air Quality

A lot of AC splits come with air filters and humidity control mechanisms that control the amount of dust and humidity that can be found in the space. This allows for sensitive customers (children or elderly, asthmatic or allergic customers) the peace of mind and body.

Multi-Head Split Systems

Multi-Head Split Systems allow multiple indoor units to connect to one outdoor condenser, which provides the convenience of having the ideal Air conditioner (in terms of output and physical constraints) to a specific space.

Split System FAQ

Are split systems the same thing as an air conditioner?

Yes, Split System includes an air-conditioning unit. But, the different kinds of air conditioning systems. These that include

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Air conditioners that are duct-fed refrigerated

All these systems operate on electricity & refrigerant under the same principle but they are different in term of installation.

How long will it take to install a split system air conditioner?

Generally speaking the typical split air conditioning system installation can take 3-6 hours. But, the exact amount of time could vary based on various factors like below;

• The size and location of both indoor and outdoor unit
• The route of copper pipes between the outdoor unit and indoor unit
• Electrical connections from the main switchboard up to the AC unit.

More Split System FAQ's

Do I need to replace or fix my AC unit?

In the majority of cases, if your air conditioner is more than 10-years-old and you notice evident issues with the A/C there’s a good chance that it’s cheaper to replace then repair.

For help in making the right decision, it is best to talk to the experts at ComfyHome to provide you with an honest opinion on the condition of your air conditioner.

What size of split system air conditioner do I need?

A typical measuring ratio will multiple the room area by a ratio of 0.15 to calculate the necessary power of the device in kilowatts.

For a room area of 40 square metres, you’ll need a Split system air conditioning unit of 6 kW. A unit with a cooling capacity of 2.5kW is ideal for 10-20 sqm rooms areas.

However, the size of the Split system air conditioning required is also affected by other variables such as how well the insulation is in place, the number of occupants and residents’ location.

To get an accurate estimate of the Split units size we suggest that you call us for a more detailed analysis.

More Split System FAQ's

How long can a split system air conditioner last?

In general, an air conditioner is built to last from 10-20 years in the an average. But it depends on heaps of things like the model of the AC, quality of the installation, routine service history etc…

It is essential to service the Split System air conditioner regularly to extend its lifespan and improve efficiency.

When should I clean my air conditioner’s filter?

As per Daikin Australia, it is strongly recommended to wash your air conditioner’s filters every 2 weeks to increase the efficiency of the system and reduce your energy consumption by 5 to 15%.

Kallista Gas Heating Services

• Gas Hot Water System Installation & Repairs Kallista
• Gas Heating Service Kallista
• Gas Heating Kallista
• Gas Log Fire Service & Repairs Kallista
• Ducted Gas Heating Servicing & Repair Kallista
• Carbon Monoxide Testing Kallista
• Braemar Ducted Gas Heating Servicing & Repair Kallista
• Vulcan Ducted Gas Heating Servicing & Repair Kallista
• Brivis Ducted Gas Heating Servicing & Repair Kallista
• Evaporative Cooling Repair Kallista
• Gas Space Heater Repair Kallista
• Gas Appliance Servicing & Repair Kallista
• Kallista
• Gas Heating Installation Kallista

What Types of Systems We Service & Repair

Every brand and type of heating system has its individual operation and maintenance requirements Our highly skilled technicians are knowledgeable and know how to provide excellent services for all heating systems, including:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team has a wealth of experience in the field of heating repairs and maintenance with a focus on all models and models of heating systems. We take pride in a rapid response time as well as a commitment to quality, efficiency and reliability.

We are able to maintain and service all major brands of heating systems and units, including:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• No Hidden Fees, Price Up Front
• Low Prices You Can Trust
• Professional Quality Workmanship Assurance
• Excellent Reputation & Reviews
• We’re personable and friendly
• A Team of Experienced and Licenced Professionals
• Request a Quote with No obligation

Our Promise To You

We at Gas Heating Service Melbourne we understand the discomfort of not having hot water and it’s something we believe no one should need to go through. This is why we place the highest priority on hot water emergencies. All of our plumbers are reliable and friendly and without doubt, we will be able to help you in any situation.

We pride ourselves on our service to customers and it is our conviction that the tiny things are the most important.

We pride ourselves on our outstanding customer service. and here’s the reason our customers are so happy with us:

• We always show up when we say we will.
• Our staff will give you a call when they are thirty minutes away.
• Competitive pricing upfront and expert advice before we begin the work.
• Always cleaning up after ourselves.

The staff at Gas Heating Service Melbourne offer emergency and maintenance services for plumbing, heating, and electrical. If at any time you have any questions regarding our services and the products we offer.